Hoch-Leistung Polymers
70 entries in dies kategorie — Seite 4 von 4
Hoch-leistung polymers sind advanced thermoplastics capable von continuous service über 150°C, offering exceptional chemical widerstand, mechanical strength, und dimensional stability. Covering PEEK, Ultem (PEI), PTFE, PPS, LCP, polyimide (Vespel), PAI (Torlon), PES, PSU, PPSU, PEK, PFA, ETFE, und FEP, diese materials sind specified für aerospace, medical implant, semiconductor, und öl & gas applications wo standard engineering plastics fail. Key selection factors: continuous service temperature, chemical widerstand, processing requirements, und kosten.
PBI Celazole Compression Molding: Processing Guidelines & Limitations
Tensile: 160 MPa · HDT: 435 °C bei 1.82 MPa
PBI (polybenzimidazole) ist der highest-temperature thermoplastic available commercially — es hat nein melting point (Tg: 427°C, degradation begins...
View Details →ETFE Hoch-Flex-Life Güte: Draht & Cable Insulation für Aerospace & Robotics
Tensile: 45 MPa · HDT: 105 °C bei 1.82 MPa
ETFE (ethylene tetrafluoroethylene) occupies ein spezifisch niche in der fluoropolymer family: es ist tougher und mehr flexible als PTFE, mehr...
View Details →COC Cyclic Olefin Copolymer: Ultra-Hoch Transparency Optical Polymer für Medical & Electronics
Tensile: 60 MPa · HDT: 130 °C bei 1.82 MPa
Cyclic Olefin Copolymer (COC) ist ein amorphous engineering thermoplastic das uniquely combines glass-wie optical clarity mit near-zero...
View Details →PA9T Genestar: Hoch-Temperatur Nylon für SMT-Compatible Electronic Connectors
Tensile: 190 MPa (33% GF) · HDT: 290 °C bei 1.82 MPa
PA9T (poly(nonamethylene terephthalamide)), developed durch Kuraray (Japan) und marketed als Genestar, ist ein semi-aromatic hoch-temperature polyamide...
View Details →PAR Polyarylate U-Polymer: Hoch-Heat Transparent Engineering Plastic mit UV Widerstand
Tensile: 70 MPa · HDT: 175 °C bei 1.82 MPa
Polyarylate (PAR) ist ein wholly aromatic polyester developed durch Unitika (Japan) und marketed als U-Polymer seit 1973. Es uniquely combines der hoch...
View Details →PCT Polycyclohexylene Terephthalate: Hoch-Temp Polyester für SMT Electronic Connectors
Tensile: 120 MPa (30% GF) · HDT: 260 °C bei 1.82 MPa
PCT (polycyclohexylene-dimethylene terephthalate) ist ein hoch-temperature semi-crystalline polyester specifically developed für lead-kostenlos SMT...
View Details →Extem XH Thermoplastic Polyimide: 310 °C Continuous Service für Aerospace & Semiconductor
Tensile: 90 MPa · HDT: 280 °C bei 1.82 MPa
SABIC Extem XH represents der highest-temperature melt-processable thermoplastic commercially available, mit ein continuous service temperature von...
View Details →Aerospace-Güte Plastics: Material Selection Leitfaden für Aircraft Components (2026)
Schweregrad: ·
Aerospace-grade plastics sind ein specialized class von hoch-leistung polymers engineered zu meet der stringent requirements von aircraft und...
View Details →Medical-Güte Plastics: Biocompatible Materials für Healthcare Devices (2026)
Schweregrad: ·
Medical-grade plastics sind hoch-leistung polymers das meet rigorous biocompatibility standards für verwenden in healthcare devices, surgical...
View Details →Semiconductor Manufacturing Plastics: Hoch-Purity Materials Leitfaden (2026)
Schweregrad: ·
Semiconductor manufacturing plastics sind ein kritisch kategorie von ultra-hoch-purity polymers specified für wafer processing ausrüstung, cleanroom...
View Details →