High-Performance Polymers
70 entries in this category — Page 4 of 4
High-performance polymers are advanced thermoplastics capable of continuous service above 150°C, offering exceptional chemical resistance, mechanical strength, and dimensional stability. Covering PEEK, Ultem (PEI), PTFE, PPS, LCP, polyimide (Vespel), PAI (Torlon), PES, PSU, PPSU, PEK, PFA, ETFE, and FEP, these materials are specified for aerospace, medical implant, semiconductor, and oil & gas applications where standard engineering plastics fail. Key selection factors: continuous service temperature, chemical resistance, processing requirements, and cost.
PBI Celazole Compression Molding: Processing Guidelines & Limitations
Tensile: 160 MPa · HDT: 435 °C at 1.82 MPa
PBI (polybenzimidazole) is the highest-temperature thermoplastic available commercially — it has no melting point (Tg: 427°C, degradation begins...
View Details →ETFE High-Flex-Life Grade: Wire & Cable Insulation for Aerospace & Robotics
Tensile: 45 MPa · HDT: 105 °C at 1.82 MPa
ETFE (ethylene tetrafluoroethylene) occupies a specific niche in the fluoropolymer family: it is tougher and more flexible than PTFE, more...
View Details →COC Cyclic Olefin Copolymer: Ultra-High Transparency Optical Polymer for Medical & Electronics
Tensile: 60 MPa · HDT: 130 °C at 1.82 MPa
Cyclic Olefin Copolymer (COC) is an amorphous engineering thermoplastic that uniquely combines glass-like optical clarity with near-zero...
View Details →PA9T Genestar: High-Temperature Nylon for SMT-Compatible Electronic Connectors
Tensile: 190 MPa (33% GF) · HDT: 290 °C at 1.82 MPa
PA9T (poly(nonamethylene terephthalamide)), developed by Kuraray (Japan) and marketed as Genestar, is a semi-aromatic high-temperature polyamide...
View Details →PAR Polyarylate U-Polymer: High-Heat Transparent Engineering Plastic with UV Resistance
Tensile: 70 MPa · HDT: 175 °C at 1.82 MPa
Polyarylate (PAR) is a wholly aromatic polyester developed by Unitika (Japan) and marketed as U-Polymer since 1973. It uniquely combines the high...
View Details →PCT Polycyclohexylene Terephthalate: High-Temp Polyester for SMT Electronic Connectors
Tensile: 120 MPa (30% GF) · HDT: 260 °C at 1.82 MPa
PCT (polycyclohexylene-dimethylene terephthalate) is a high-temperature semi-crystalline polyester specifically developed for lead-free SMT...
View Details →Extem XH Thermoplastic Polyimide: 310 °C Continuous Service for Aerospace & Semiconductor
Tensile: 90 MPa · HDT: 280 °C at 1.82 MPa
SABIC Extem XH represents the highest-temperature melt-processable thermoplastic commercially available, with a continuous service temperature of...
View Details →Aerospace-Grade Plastics: Material Selection Guide for Aircraft Components (2026)
Severity: ·
Aerospace-grade plastics are a specialized class of high-performance polymers engineered to meet the stringent requirements of aircraft and...
View Details →Medical-Grade Plastics: Biocompatible Materials for Healthcare Devices (2026)
Severity: ·
Medical-grade plastics are high-performance polymers that meet rigorous biocompatibility standards for use in healthcare devices, surgical...
View Details →Semiconductor Manufacturing Plastics: High-Purity Materials Guide (2026)
Severity: ·
Semiconductor manufacturing plastics are a critical category of ultra-high-purity polymers specified for wafer processing equipment, cleanroom...
View Details →