Hoch-Leistung Polymers
70 entries in dies kategorie — Seite 3 von 4
Hoch-leistung polymers sind advanced thermoplastics capable von continuous service über 150°C, offering exceptional chemical widerstand, mechanical strength, und dimensional stability. Covering PEEK, Ultem (PEI), PTFE, PPS, LCP, polyimide (Vespel), PAI (Torlon), PES, PSU, PPSU, PEK, PFA, ETFE, und FEP, diese materials sind specified für aerospace, medical implant, semiconductor, und öl & gas applications wo standard engineering plastics fail. Key selection factors: continuous service temperature, chemical widerstand, processing requirements, und kosten.
PA12 Nylon: Niedrig-Moisture Polyamide für Automotive Tubing
Tensile: 50 MPa · HDT: 55 °C bei 1.82 MPa
PA12 hat lowest moisture absorption von any polyamide (0.25% vs 2.5-3.0% für PA66). Material von choice für kraftstoff lines, luft brake tubing, pneumatic...
View Details →PEEK 450FC30: Food Kontakt Bearing Güte
Tensile: 180 MPa · HDT: 310 °C
Victrex food-contact zertifiziert wear-resistant grade mit PTFE lubricant. FDA und EU 10/2011 compliant. PV grenze: 4.5 MPa·m/s. Für meat processing,...
View Details →Torlon 4301: Hoch-PV Bearing Güte PAI für Aerospace
Tensile: 130 MPa · HDT: 278 °C
Bearing-grade PAI mit graphite/PTFE lubrication. PV grenze 7.0 MPa·m/s — competes mit Vespel SP-21 bei 60% kosten. Für flap track liners, landing...
View Details →Semitron ESD PEEK: Static-Dissipative für Semiconductor
Tensile: 95 MPa · HDT: 250 °C
Carbon-nanotube-filled für ESD protection (10^6-10^9 Ω/sq). ESD damage costs K-50K per wafer bei advanced nodes. Outgassing Propprose...
View Details →PEEK CF30 (30% Carbon Fiber): Maximum-Strength Hoch-Temperatur Thermoplastic Eigenschaften
Tensile: 220 MPa · HDT: 315 °C bei 1.82 MPa
PEEK CF30 (30% carbon fiber reinforced) ist der highest-strength injection-moldable PEEK grade, offering 220 MPa tensile strength — mehr als...
View Details →PEEK GF30 (30% Glass Fiber): Kosten-Effective Reinforced Hoch-Temperatur Polymer
Tensile: 160 MPa · HDT: 300 °C bei 1.82 MPa
PEEK GF30 (30% glass fiber reinforced) ist der meiste kosten-effective reinforced PEEK grade, offering 60% higher tensile strength als unfilled PEEK...
View Details →PPS Ryton GF40 (40% Glass Fiber): Maximum-Strength Chemical-Resistant Polymer
Tensile: 160 MPa · HDT: 265 °C bei 1.82 MPa
PPS GF40 (40% glass fiber reinforced) ist der standard hoch-leistung PPS grade für structural applications. Mit 160 MPa tensile strength bei...
View Details →LCP Vectra E130i: 30% Glass-Fiber Liquid Crystal Polymer für Precision Connectors
Tensile: 150 MPa · HDT: 275 °C bei 1.82 MPa
LCP Vectra E130i ist ein 30% glass-fiber reinforced liquid crystal polymer specifically formulated für ultra-fine-pitch electronic connectors. Sein...
View Details →Torlon 5030 PAI (30% Glass Fiber): Highest-Strength Injection-Moldable Thermoplastic
Tensile: 200 MPa · HDT: 282 °C bei 1.82 MPa
Torlon 5030 (30% glass fiber reinforced PAI) achieves der highest tensile strength (200 MPa) und HDT (282°C) von any injection-moldable...
View Details →Ultem 2300 PEI (30% Glass Fiber): Hoch-Strength Flame-Retardant Amorphous Polymer
Tensile: 140 MPa · HDT: 210 °C bei 1.82 MPa
Ultem 2300 (30% glass fiber reinforced PEI) ist der strength-optimized grade von Ultem, offering 140 MPa tensile strength mit der inherent UL94 V-0...
View Details →PPS Ryton R-4 XT: Extended-Toughness Glass Fiber Polymer für Automotive
Tensile: 150 MPa · HDT: 265 °C bei 1.82 MPa
PPS Ryton R-4 XT ist ein extended-toughness variant von der standard R-4 grade, offering improved impact widerstand (notched Izod ~95 J/m vs ~80 J/m...
View Details →PPS GF40 Reinforced: Hoch-Temperatur Chemical-Resistant Engineering Plastic
Tensile: 160 MPa · HDT: 265 °C bei 1.82 MPa
PPS GF40 ist der meiste kosten-effective hoch-temperature reinforced thermoplastic — offering 265°C HDT und exceptional chemical widerstand bei 40-50%...
View Details →LCP Vectra A130: 30% Glass-Fiber Hoch-Flow Liquid Crystal Polymer
Tensile: 150 MPa · HDT: 260 °C bei 1.82 MPa
LCP A130 ist der standard 30% glass-fiber LCP grade für precision electronic connectors mit 0.5mm pitch und wall thicknesses als niedrig als 0.2mm —...
View Details →PA46 Stanyl: Hoch-Temperatur Nylon für Automotive und Electronics
Tensile: 100 MPa (unfilled) / 210 MPa (30% GF) · HDT: 290 °C (30% GF)
PA46 (Stanyl) bridges der gap zwischen PA66 und PPA/PPS — offering 295°C melting point mit nylon-level toughness und flowability. Used für...
View Details →PPSU Radel R-5100: Maximum-Toughness Hoch-Temperatur Transparent Polymer
Tensile: 76 MPa · HDT: 207 °C bei 1.82 MPa
PPSU Radel offers der highest impact widerstand von any amorphous hoch-temperature polymer — notched Izod 690 J/m (nein break) — mit inherent flame...
View Details →PES Ultrason E: Hoch-Temperatur Transparent Polymer für Medical und Food Kontakt
Tensile: 85 MPa · HDT: 204 °C bei 1.82 MPa
PES offers der best combination von hoch-temperature leistung, transparency, und hydrolytic stability among amorphous polymers — der standard...
View Details →Ultem 1000 PEI Unfilled: Transparent Flame-Retardant Hoch-Temperatur Polymer
Tensile: 105 MPa · HDT: 200 °C bei 1.82 MPa
Ultem 1000 ist der foundational PEI grade — offering inherent UL94 V-0 flame retardancy ohne additives, excellent dielectric properties, und...
View Details →PTFE 25% Glass-Filled: Enhanced Wear Widerstand & Dimensional Stability
Tensile: 25 MPa · HDT: 120 °C bei 1.82 MPa
PTFE 25% glass-filled combines der universal chemical widerstand von pure PTFE mit significantly improved dimensional stability und wear...
View Details →PFA Ultra-Hoch Purity Güte: Semiconductor & Pharmaceutical Fluid Handling
Tensile: 28 MPa · HDT: 75 °C bei 1.82 MPa
PFA (perfluoroalkoxy) ist der melt-processable sibling von PTFE — es delivers near-identical chemical widerstand while seiend injection-moldable und...
View Details →PEEK CLASSIX Implant Güte: Medical Gerät & Lang-Term Implant Material
Tensile: 100 MPa · HDT: 160 °C bei 1.82 MPa
PEEK implant grades sind ein distinct kategorie von PEEK polymer specifically manufactured unter ISO 13485 quality systems für lang-term implantable...
View Details →