PC/PBT Blend Xenoy Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-10
PC/PBT blend, best known unter SABIC's Xenoy trade name, ist ein thermoplastic alloy das combines polycarbonate's exceptional impact widerstand (even bei niedrig temperatures) mit PBT's chemical widerstand zu gasoline, oils, und automotive fluids. Der...
PC/PBT blend, best known unter SABIC's Xenoy trade name, ist ein thermoplastic alloy das combines polycarbonate's exceptional impact widerstand (even bei niedrig temperatures) mit PBT's chemical widerstand zu gasoline, oils, und automotive fluids. Der PC phase provides ductility und impact strength; der PBT phase provides crystalline regions das resist stress cracking von chemical exposure.
Dies blend occupies ein strategic middle ground: significantly higher impact widerstand als PC/ABS, better niedrig-temperature toughness als PBT alone, und far better chemical widerstand als PC alone (welche stress-cracks catastrophically wenn exposed zu gasoline oder solvents). Diese properties machen PC/PBT der default material für automotive body panels, motorcycle fairings, power werkzeug housings, und lawn/garden ausrüstung.
SABIC Xenoy pioneered der kategorie. Key applications einschließen Toyota und Honda bumper beams, Stihl chainsaw housings, und Milwaukee Werkzeug power drill bodies. In Japan, Mitsubishi Engineering-Plastics offers PC/PBT blends für automotive und industrial markets.
Processing: Melt temperature 255-275 °C, mold temperature 50-80 °C. Predrying bei 100-110 °C für 4 hours ist kritisch — beide PC und PBT components sind hydrolysis-sensitive. Processing temperature müssen balance PC's brauchen für heat (zu fill) against PBT's thermal sensitivity (degradation über 280 °C). EIN medium screw mit 2.5:1 compression ratio ist recommended.
Recommended Anwendungen
PC/PBT Blend Xenoy ist commonly specified für:
⚠ Nicht Recommended Für
PC/PBT Blend Xenoy ist nicht recommended für:
- Continuous outdoor UV exposure ohne UV coating (yellows und loses impact strength rapidly)
- Kontakt mit aromatic hydrocarbons, ketones, oder esters (causes environmental stress cracking)
- Steam sterilization über 120°C (verwenden PSU oder PPSU für autoclave applications instead)
Selection & Application Leitfaden
Polycarbonate (PC) ist der transparent engineering plastic mit der highest impact strength — virtually unbreakable in thin sections. Choose PC über acrylic (PMMA) wenn impact widerstand ist needed; über PSU wenn unter kosten und higher clarity matter und steam sterilization isn't erforderlich. PC's haupt limitations sind poor chemical widerstand zu solvents und UV degradation ohne stabilization. Für higher temperature oder flame widerstand, consider PC/ABS blend oder Ultem.
Real-World Anwendungen
PC's exceptional impact strength (850 J/m notched Izod) und optical clarity machen es der standard für safety helmets, riot shields, und protective visors.
PC's optical clarity, impact widerstand, und thermal stability für halogen bulb environments machen es der dominant material für headlamp äußere lenses worldwide.
PC und PC/ABS blends bereitstellen der combination von impact strength, flame retardancy (mit additives), und surface finish quality für laptop, telefon, und tablet housings.
PC's clarity für visual inspection, gamma sterilizability, und impact toughness suit es für IV components, blood centrifuge housings, und diagnostic gerät enclosures.
Processing & Kosten Considerations
Manufacturing Tips
- PC processes bei 280-320°C melt temperature mit mold temperatures von 80-100°C. Thorough drying ist wesentlich (120°C für 3-4 hours zu <0.02% moisture) — PC ist sehr hygroscopic und even klein amounts von moisture cause splay marks und reduced impact strength.
- PC hat hoch melt viscosity — higher injection pressures und larger gates sind needed compared zu commodity plastics. Thin-wall molding kann require fast injection speeds zu prevent premature freeze-aus.
- Design teile mit uniform wall thickness zu prevent sink marks und internal stresses. PC ist notch-sensitive — avoid sharp internal corners (verwenden R>0.5mm fillets) zu maintain impact strength.
PC costs $5-12/kg — mehr als ABS ($2-5/kg) but less als PSU ($15-35/kg). PC/ABS blends offer ein middle ground bei $3-7/kg mit better flow und processability. Für applications requiring beide transparency und impact widerstand, PC hat nein kosten-effective substitute. Für opaque applications, PC/ABS ist oft ein better wert proposition.
Technical Eigenschaften
| Dichte | 1.20 g/cm³ |
|---|---|
| Zugfestigkeit | 55 MPa |
| Schmelzpunkt | 225 °C (PBT phase); PC phase amorphous |
| Shrinkage Rate | 0.8-1.0% |
| Flexural Modulus | 2.1 GPa |
| Hdt | 115 °C bei 1.82 MPa |
| Izod Impact | 700 J/m (notched, 23 °C) |
| Chemical Widerstand | Gut (gasoline, oils, mild acids/bases) |
| Tensile Modulus | 2.1 GPa |
| Streckgrenze | 50 MPa |
| Bruchdehnung Bei Break | 120% |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Sabic Xenoy | |
| Covestro Makroblend | |
| Mitsubishi Engineering-Plastics Iupilon/Xyron |
Frequently Asked Questions
Wenn sollte I choose PC/PBT über PC/ABS?
Choose PC/PBT wenn der teil werden sein exposed zu gasoline, motor öl, brake fluid, oder cleaning solvents — PC/ABS stress-cracks rapidly in diese environments. PC/PBT auch hat better niedrig-temperature impact widerstand (-40 °C). Choose PC/ABS wenn chemical exposure ist nicht ein concern und sie wollen 15-20% unter material kosten und better surface aesthetics für painting.
Warum ist PC/PBT so popular für power tools?
Power tools require housings das survive repeated 1-2 meter drops onto concrete (PC impact widerstand) und exposure zu lubricating oils und job-site chemicals (PBT chemical widerstand). Milwaukee, DeWalt, und Makita alle specify PC/PBT für professional-grade werkzeug housings.
Was ist der difference zwischen PC und PMMA (acrylic)?
PC hat viel higher impact strength (850 J/m vs 16 J/m für PMMA) und higher service temperature (115°C vs 85°C). PMMA hat better optical clarity (92% vs 88% transmission), better UV widerstand, und unter kosten. Choose PC wenn impact widerstand ist kritisch; PMMA für display applications wo optical quality und UV stability matter mehr.
Können PC sein autoclaved?
Nicht recommended. Norm PC softens und distorts bei autoclave temperatures (134°C). Es können withstand ein wenige cycles but rapidly degrades. Für steam sterilization, verwenden PSU, PPSU, oder Ultem instead. PC ist compatible mit EtO und gamma sterilization für single-verwenden medical devices.
Warum tut PC stress-crack in der presence von solvents?
PC ist highly susceptible zu environmental stress cracking wenn exposed zu solvents (gasoline, acetone, MEK) while unter mechanical stress. Der solvent migrates in der polymer bei stress concentration points, causing microcracks das propagate rapidly. Für solvent-exposed applications, specify stress-annealed teile oder verwenden ein chemically resistant alternative (PPS, PPSU, oder PEEK).
Ist BPA-kostenlos polycarbonate available?
Ja. BPA-kostenlos copolyester alternatives (Tritan, PCTG) bereitstellen similar clarity und impact widerstand ohne bisphenol-EIN. Diese materials sind increasingly specified für food contact und children's products. However, sie haben unter temperature widerstand als standard PC und kann nicht sein suitable für alle PC applications.
Was ist PC/ABS blend und wenn sollte I verwenden es?
PC/ABS blend combines PC's impact widerstand und heat widerstand mit ABS's processability und unter kosten. Der blend offers better flow (easier thin-wall molding), unter melt temperature, und unter kosten als pure PC. Es ist der dominant material für electronic gerät housings. Verwenden pure PC wenn transparency ist needed; PC/ABS für opaque structural und housing applications.
Verwandt Diagnostics & Materials
PA6 Nylon 6 GF30 (30% Glass Fiber): Hoch-Strength...
PA6 (Nylon 6) mit 30% glass fiber reinforcement ist der workhorse engineering thermoplastic für structural...
PC/ABS Blend: Impact-Resistant Engineering Thermoplastic...
PC/ABS blend combines der impact widerstand und heat widerstand von polycarbonate mit der processability und...
POM Delrin Homopolymer: Niedrig-Friction Hoch-Stiffness...
POM (polyoxymethylene) homopolymer, best known als DuPont Delrin, ist der standard material für precision gears,...
PA66 Nylon 66 Unfilled: Norm Engineering...
PA66 unfilled offers higher strength, stiffness, und heat widerstand als PA6, making es der preferred nylon für...
PA6 Nylon 6 Unfilled: Versatile Allgemein-Purpose...
PA6 unfilled ist der meiste widely used nylon grade — excellent balance von strength, toughness, wear widerstand, und...
PC Polycarbonate Unfilled: Transparent Hoch-Impact...
Polycarbonate offers der highest impact widerstand von any clear thermoplastic — 250x tougher als glass — mit...
ABS Unfilled: Allgemein-Purpose Impact-Resistant...
ABS ist der meiste widely used engineering thermoplastic — 40 million tons produced annually — balancing gut...
PMMA Acrylic: Optical-Güte Transparent Engineering Plastic
PMMA transmits 92% von visible licht — higher als glass (90%) — mit excellent weatherability und surface hardness....
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org