PA66 Nylon 66 Unfilled Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-08
PA66 unfilled offers higher strength, stiffness, und heat widerstand als PA6, making es der preferred nylon für automotive unter-hood und industrial mechanical components.Propprose Processability Score (PPS): 8/10 (Challenging) — Based ein melt...
Recommended Anwendungen
PA66 Nylon 66 Unfilled ist commonly specified für:
⚠ Nicht Recommended Für
PA66 Nylon 66 Unfilled ist nicht recommended für:
- Moisture-kritisch dimensional applications ohne post-molding conditioning (nylon absorbs auf zu 8% moisture, changing dimensions 0.5-2%)
- Strong acid oder oxidizing environments (mineral acids attack nylon; verwenden PVDF oder PTFE)
- Electrical insulation in humid environments (moisture absorption degrades dielectric properties)
Selection & Application Leitfaden
Nylon (PA6/PA66) ist der workhorse engineering plastic — offering der best balance von mechanical strength, toughness, wear widerstand, und kosten für allgemein industrial applications. Choose PA66 über PA6 wenn higher temperature widerstand und stiffness sind needed; choose PA6 wenn impact widerstand und flexibility matter mehr. Beide absorb moisture significantly (2-3%), welche affects dimensions und properties — consider dies in ihr design.
Real-World Anwendungen
Glass-filled PA66 (30% GF) provides der temperature widerstand (HDT 255°C bei 0.45 MPa), stiffness, und unter-hood chemical widerstand für motor covers und luft ansaugung manifolds bei 4-8× unter kosten als PEEK.
Cast nylon (PA6) provides quiet operation, inherent lubricity, und wear widerstand für gears, sprockets, und bearing surfaces in conveyor und packaging ausrüstung.
PA66 mit flame retardant additives meets UL94 V-0 für electrical connectors und terminal blocks bei viel unter kosten als hoch-temperature alternatives.
PA6/PA66's combination von strength, flexibility, und weatherability makes es der universal material für cable ties, zip ties, und plastic fasteners in construction und electrical installations.
Processing & Kosten Considerations
Manufacturing Tips
- Nylon ist hygroscopic und müssen sein thoroughly dried vor processing (80-100°C für 4-6 hours für PA6, 80°C für 3-4 hours für PA66). Moisture über 0.2% causes splay marks und reduced molecular weight due zu hydrolysis. Verwenden dehumidifying dryers für consistent results.
- Nylon's moisture absorption affects dimensions — teile können grow 0.5-1.0% in length nach conditioning zu 50% RH. Design molds zu account für post-molding dimensional changes, oder specify condition der teile vor kritisch assembly operations.
- Glass-filled nylons (30% GF) require hardened mold surfaces (P20 oder H13 steel) und hardened screw tips due zu abrasive wear. Expect 2-3× faster mold wear compared zu unfilled nylon processing.
Nylon ist among der meiste affordable engineering plastics bei $3-8/kg für unfilled grades und $6-15/kg für glass-filled grades. Dies 10-30× kosten advantage über PEEK makes nylon der default choice für der vast majority von mechanical applications unter 120°C. Wenn higher temperature widerstand ist needed, consider PA46 (Stanyl, $15-25/kg) oder PPA ($12-25/kg) vor jumping zu PEEK.
Technical Eigenschaften
| Dichte | 1.14 g/cm³ |
|---|---|
| Zugfestigkeit | 80 MPa (dry) |
| Schmelzpunkt | 260 °C |
| Shrinkage Rate | 1.5-2.0% |
| Flexural Modulus | 3.0 GPa |
| Hdt | 95 °C bei 1.82 MPa |
| Continuous Service Temp | 120 °C |
| Tensile Modulus | 3.0 GPa |
| Streckgrenze | 80 MPa |
| Bruchdehnung Bei Break | 60% |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| BASF Ultramid A3K | |
| DuPont Zytel 101L | |
| Radici Radilon EIN |
Frequently Asked Questions
PA66 vs PA6 — wenn zu verwenden welche?
PA66: higher strength, stiffness, melting point (260°C vs 220°C), und better creep widerstand. PA6: better impact bei niedrig temperature, better surface finish, 15-20% unter kosten. Für automotive motor bay components, PA66 ist standard. Für consumer goods und allgemein engineering, PA6 ist usually sufficient.
Was ist der difference zwischen PA6 und PA66?
PA66 hat ein higher melting point (260°C vs 220°C für PA6), higher stiffness, und better chemical widerstand. PA6 hat better impact widerstand, better surface finish, und faster molding cycle times. Für meiste structural applications über 80°C, PA66 ist preferred. PA6 ist chosen für sein toughness und unter kosten in less demanding applications.
Wie tut moisture affect nylon properties?
Moisture acts als ein plasticizer in nylon — conditioned (50% RH) PA66 hat 50% unter tensile strength als dry-als-molded but 2-3× higher impact strength. Dies means dry nylon ist strong but brittle; conditioned nylon ist tougher but weaker. Immer specify whether mechanical properties sind dry oder conditioned für ihr application.
Können nylon sein used für food contact?
Ja. Spezifisch PA6 und PA66 grades comply mit FDA 21 CFR 177.1500 für food contact. Natural (unpigmented) grades sind meiste commonly zertifiziert. Glass-filled und flame-retardant grades kann nicht sein compliant — verify mit der manufacturer. Nylon ist widely used in food processing machinery components.
Ist nylon resistant zu UV exposure?
Unprotected nylon degrades unter UV exposure, losing tensile strength und becoming discolored. Für outdoor applications, specify UV-stabilized grades mit carbon black oder hindered amine licht stabilizers (HALS). Carbon black provides der best UV protection but limits color options. HALS allow lighter colors mit moderate UV widerstand.
Was ist der difference zwischen extruded und cast nylon?
Extruded nylon (PA6 oder PA66) ist produced durch melt extrusion und hat consistent properties. Cast nylon (PA6G, auch called MC nylon) ist produced durch anionic polymerization in ein mold, yielding higher molecular weight und better mechanical properties — approximately 20% higher tensile strength und 30% better impact widerstand. Cast nylon ist used für large-diameter rods, tubes, und custom shapes.
Verwandt Diagnostics & Materials
PA6 Nylon 6 GF30 (30% Glass Fiber): Hoch-Strength...
PA6 (Nylon 6) mit 30% glass fiber reinforcement ist der workhorse engineering thermoplastic für structural...
PC/ABS Blend: Impact-Resistant Engineering Thermoplastic...
PC/ABS blend combines der impact widerstand und heat widerstand von polycarbonate mit der processability und...
POM Delrin Homopolymer: Niedrig-Friction Hoch-Stiffness...
POM (polyoxymethylene) homopolymer, best known als DuPont Delrin, ist der standard material für precision gears,...
PA6 Nylon 6 Unfilled: Versatile Allgemein-Purpose...
PA6 unfilled ist der meiste widely used nylon grade — excellent balance von strength, toughness, wear widerstand, und...
PC Polycarbonate Unfilled: Transparent Hoch-Impact...
Polycarbonate offers der highest impact widerstand von any clear thermoplastic — 250x tougher als glass — mit...
ABS Unfilled: Allgemein-Purpose Impact-Resistant...
ABS ist der meiste widely used engineering thermoplastic — 40 million tons produced annually — balancing gut...
PMMA Acrylic: Optical-Güte Transparent Engineering Plastic
PMMA transmits 92% von visible licht — higher als glass (90%) — mit excellent weatherability und surface hardness....
SAN Styrene-Acrylonitrile: Clear Rigid Engineering...
SAN offers better chemical widerstand und clarity als ABS und better thermal widerstand als polystyrene. Used für...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org