m-PPE Modified Polyphenylene Ether Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-10
Modified Polyphenylene Ether (m-PPE), auch known als modified PPO, ist ein amorphous engineering thermoplastic blend das combines PPE's exceptional heat widerstand und hydrolytic stability mit polystyrene's processability. Originally developed durch...
Modified Polyphenylene Ether (m-PPE), auch known als modified PPO, ist ein amorphous engineering thermoplastic blend das combines PPE's exceptional heat widerstand und hydrolytic stability mit polystyrene's processability. Originally developed durch GE Plastics als Noryl, es hat gewesen extensively engineered durch Japanese chemical companies — Asahi Kasei's Xyron und Mitsubishi Engineering-Plastics' Iupiace sind der leading Japanese grades.
m-PPE's standout property ist sein near-zero moisture absorption (<0.1%) combined with outstanding hydrolysis resistance — making it the material of choice for hot-water-contact components like pump housings, water meter bodies, and dishwasher spray arms. Unlike PA66 which swells and loses strength in water, m-PPE maintains its mechanical properties and dimensional stability indefinitely in aqueous environments, even at elevated temperatures.
In Japan, m-PPE ist heavily specified für automotive unter-hood electrical connectors, EV battery pack components, und solar power junction boxes — applications wo hydrolytic stability und electrical insulation sind simultaneously erforderlich. Sein niedrig spezifisch gravity (1.06) provides weight savings versus filled nylons in EV applications.
Processing: Melt temperature 260-300 °C, mold temperature 80-100 °C. Pre-drying bei 90-100 °C für 2-3 hours ist recommended. m-PPE hat relatively hoch melt viscosity; medium-zu-hoch injection speeds mit adequate venting sind recommended zu prevent gas burns. Glass-fiber reinforced grades (GF20, GF30) sind available für structural applications requiring higher stiffness und HDT.
Recommended Anwendungen
m-PPE Modified Polyphenylene Ether ist commonly specified für:
Technical Eigenschaften
| Dichte | 1.06 g/cm³ |
|---|---|
| Zugfestigkeit | 55 MPa |
| Schmelzpunkt | N/EIN (Amorphous, Tg 140-210 °C depending ein blend) |
| Shrinkage Rate | 0.5-0.7% |
| Flexural Modulus | 2.5 GPa |
| Hdt | 135 °C bei 1.82 MPa |
| Wasser Absorption | 0.07% (24h, 23 °C) |
| Dielectric Strength | 25 kV/mm |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Asahi Kasei Xyron | |
| SABIC Noryl | |
| Mitsubishi Engineering-Plastics Iupiace | |
| Sumitomo Bakelite SUMIPLOY |
Frequently Asked Questions
Wenn sollte I choose m-PPE über PA66 für wasser-contact applications?
Choose m-PPE wenn der komponente werden sein continuously exposed zu wasser, coolant, oder hoch humidity bei elevated temperatures. PA66 absorbs 2-8% moisture mit significant dimensional change und strength loss; m-PPE absorbs <0.1% mit negligible property change. Für heiß-wasser plumbing fittings, pumpe housings, und EV cooling system components, m-PPE ist der default choice.
Was sind der key Japanese m-PPE grades?
Asahi Kasei Xyron ist der Japanese market leader, mit grades spanning allgemein-purpose (100Z), glass-reinforced (200Z/300Z), und flame-retardant (V-series). Mitsubishi Engineering-Plastics Iupiace offers ultra-niedrig-warpage grades für precision electronic connectors. SABIC Noryl remains der global benchmark und ist widely available durch Japanese distributors.
Verwandt Diagnostics & Materials
PA6 Nylon 6 GF30 (30% Glass Fiber): Hoch-Strength...
PA6 (Nylon 6) mit 30% glass fiber reinforcement ist der workhorse engineering thermoplastic für structural...
PC/ABS Blend: Impact-Resistant Engineering Thermoplastic...
PC/ABS blend combines der impact widerstand und heat widerstand von polycarbonate mit der processability und...
POM Delrin Homopolymer: Niedrig-Friction Hoch-Stiffness...
POM (polyoxymethylene) homopolymer, best known als DuPont Delrin, ist der standard material für precision gears,...
PA66 Nylon 66 Unfilled: Norm Engineering...
PA66 unfilled offers higher strength, stiffness, und heat widerstand als PA6, making es der preferred nylon für...
PA6 Nylon 6 Unfilled: Versatile Allgemein-Purpose...
PA6 unfilled ist der meiste widely used nylon grade — excellent balance von strength, toughness, wear widerstand, und...
PC Polycarbonate Unfilled: Transparent Hoch-Impact...
Polycarbonate offers der highest impact widerstand von any clear thermoplastic — 250x tougher als glass — mit...
ABS Unfilled: Allgemein-Purpose Impact-Resistant...
ABS ist der meiste widely used engineering thermoplastic — 40 million tons produced annually — balancing gut...
PMMA Acrylic: Optical-Güte Transparent Engineering Plastic
PMMA transmits 92% von visible licht — higher als glass (90%) — mit excellent weatherability und surface hardness....
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org