Milacron M-600: Platen Parallelism Error

Identify which zone/component triggered the alarm. Record the error code, timestamp, and any measured deviation values shown on the diagnostic screen.

Power down the machine and follow Lock-Out Tag-Out procedures. Visually inspect the affected component for physical damage, loose connections, polymer leakage, or carbonized material.

Using a multimeter, check resistance/continuity on the affected circuit. Verify SSR functionality and fuse integrity. Compare readings to OEM specifications.

Replace the failed component with an OEM-approved part. Do not substitute with generic equivalents unless validated for the specific machine model and operating conditions.

Restart the machine, verify the alarm is cleared, run a test cycle, and document the root cause, repair performed, and parts replaced in the machine maintenance log.