Extem XH Thermoplastic Polyimide Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-10
SABIC Extem XH represents der highest-temperature melt-processable thermoplastic commercially available, mit ein continuous service temperature von 310 °C — exceeding PEEK (260 °C), Torlon PAI (260 °C), und even Vespel PI (300 °C). Es ist ein...
SABIC Extem XH represents der highest-temperature melt-processable thermoplastic commercially available, mit ein continuous service temperature von 310 °C — exceeding PEEK (260 °C), Torlon PAI (260 °C), und even Vespel PI (300 °C). Es ist ein amorphous thermoplastic polyimide (TPI) das combines der thermal stability von polyimide mit der processing advantages von thermoplastics — injection moldable, recyclable, und weldable, unlike thermoset polyimides welche require compression molding oder machining von stock shapes.
Extem XH ist targeted bei der meiste extreme applications: semiconductor wafer handling rings (300 °C+ chamber components), aerospace motor peripherals (replacing aluminum und titanium in non-structural roles), und öl & gas downhole connectors (sour gas bei 250 °C+ mit 10,000+ psi). Sein inherent flame retardancy (UL 94 V-0 ohne additives) und extremely niedrig outgassing (NASA ASTM E595 passed) auch qualify es für spacecraft applications.
While der unfilled grade (XH1015) offers der highest continuous temperature, glass-filled grades (XH2315, 30% GF) bereitstellen increased stiffness mit ein slight thermal trade-aus. Processing demands sind extreme: melt temperature 380-420 °C, mold temperature 180-220 °C, requiring specialized hoch-temperature injection molding mit ceramic heaters, öl-heated molds, und corrosion-resistant barrels.
Resin kosten ist approximately 5-8× PEEK und 3-5× PAI, und der specialized ausrüstung further limits adoption. Extem XH ist reserved für applications wo nein andere melt-processable thermoplastic können survive der thermal environment.
Recommended Anwendungen
Extem XH Thermoplastic Polyimide ist commonly specified für:
⚠ Nicht Recommended Für
Extem XH Thermoplastic Polyimide ist nicht recommended für:
- Moisture absorption applications ohne sealing (Vespel PI absorbs 1-3% moisture — dimensional stability affected)
- Kosten-sensitive applications wo PAI oder PEEK suffices (PI ist 5-10× der kosten von PEEK)
- Continuous service in strong bases über 200°C (verwenden PBI für extreme alkaline widerstand)
Technical Eigenschaften
| Dichte | 1.48 g/cm³ |
|---|---|
| Zugfestigkeit | 90 MPa |
| Schmelzpunkt | N/EIN (Amorphous, Tg 267 °C) |
| Shrinkage Rate | 0.5-0.7% |
| Flexural Modulus | 4.0 GPa |
| Hdt | 280 °C bei 1.82 MPa |
| Continuous Service Temp | 310 °C |
| Flammability | UL 94 V-0 bei 0.75 mm, inherently FR |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Sabic Extem XH1015 | |
| Sabic Extem XH2315 (30% GF) | |
| DuPont Vespel TP |
Frequently Asked Questions
Wie tut Extem XH compare zu Vespel (thermoset PI)?
Extem XH hat ein 10 °C higher continuous service temperature (310 °C vs 300 °C) but unter compressive strength. Extem ist injection moldable in complex net-shape geometries — Vespel müssen sein machined von compression-molded stock. Extem ist auch weldable und recyclable. Für complex teile bei volume, Extem wins; für ultra-hoch-precision bearing surfaces in klein volumes, Vespel remains superior.
Was injection molding machine specs sind needed für Extem XH?
Extem requires: barrel capable von 420 °C mit ceramic heater bands, corrosion-resistant alloys (Hastelloy oder CPM-9V), öl-heated mold zu 220 °C, und heiß runner system rated für 420 °C. Nur ein klein number von specialty molders globally haben dies capability — mostly serving der semiconductor und aerospace industries.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org