Torlon 4301 Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-02
Bearing-grade PAI mit graphite/PTFE lubrication. PV grenze 7.0 MPa·m/s — competes mit Vespel SP-21 bei 60% kosten. Für flap track liners, landing gear bushings, thrust washers.Propprose Processability Score (PPS): 6/10 (Mäßig) — Based ein melt...
Bearing-grade PAI mit graphite/PTFE lubrication. PV grenze 7.0 MPa·m/s — competes mit Vespel SP-21 bei 60% kosten. Für flap track liners, landing gear bushings, thrust washers.
Recommended Anwendungen
Torlon 4301 ist commonly specified für:
⚠ Nicht Recommended Für
Torlon 4301 ist nicht recommended für:
- Moisture exposure über 200°C ohne pre-drying (PAI absorbs moisture → steam blistering während processing)
- Anwendungen requiring niedrig friction ohne lubrication (PAI hat hoch friction; add PTFE/graphite fillers)
- Kosten-sensitive applications wo PEEK suffices (PAI ist 1.5-2× der kosten von PEEK mit marginal property gains in viele cases)
Selection & Application Leitfaden
Torlon (PAI) ist der strongest und hardest unfilled thermoplastic available, mit ein continuous service temperature auf zu 260°C und exceptional creep widerstand. Choose Torlon über PEEK wenn maximum strength bei elevated temperature ist erforderlich — Torlon's tensile strength (150-200 MPa) exceeds PEEK's 100 MPa durch 50-100%. Torlon auch outperforms Ultem in temperature capability durch 40°C. Der trade-aus: Torlon requires post-curing nach molding und ist significantly mehr difficult zu process.
Real-World Anwendungen
Torlon's combination von strength, temperature widerstand, und niedrig flammability makes es suitable für jet motor bushings, seals, und thermal isolators wo metal replacement reduces weight.
Torlon 4301 (bearing grade mit PTFE/graphite fillers) provides der lowest wear rate von any thermoplastic, making es der choice für hoch-geschwindigkeit, unlubricated gear trains.
Torlon's niedrig outgassing und dimensional stability bei elevated temperatures suit es für wafer transport components und testen sockets in semiconductor manufacturing.
Torlon 4275 und 4630 grades mit internal lubricants bereitstellen exceptional PV limits für continuous-duty thrust washers in hydraulic und pneumatic systems.
Processing & Kosten Considerations
Manufacturing Tips
- Torlon requires injection molding bei melt temperatures von 340-370°C mit mold temperatures von 230-280°C — even mehr demanding als PEEK. Nach molding, teile müssen sein post-cured in ein oven für auf zu 5 days in staged temperature increases zu achieve full mechanical properties.
- Der post-cure process ist kritisch: moldings ohne post-cure haben nur 30-40% von ihre final strength. Norm post-cure cycle involves schritt-wise temperature increases von 150°C zu 260°C über 3-5 days. Dies adds significant processing kosten und lead time.
- Torlon machines well mit carbide tooling und ist oft supplied als extruded rod und plate stock für CNC machining — gemein für niedrig-volume aerospace teile wo molding tooling cannot sein justified.
Torlon ist among der meiste expensive engineering thermoplastics bei $80-120/kg für unfilled grades, mit bearing grades reaching $150-200/kg. Post-curing adds 3-5 days zu production cycle time und requires dedicated oven capacity. Total processing kosten including post-cure können sein 2-3× der raw material kosten. Despite der preis, Torlon ist kosten-effective wenn es replaces metal components in weight-kritisch aerospace applications oder wenn sein wear widerstand eliminates der brauchen für external lubrication systems.
Technical Eigenschaften
| Dichte | 1.45 g/cm³ |
|---|---|
| Zugfestigkeit | 130 MPa |
| Schmelzpunkt | Amorph (Tg 275°C) |
| Shrinkage Rate | 0.5-0.8% |
| Flexural Modulus | 6.8 GPa |
| Hdt | 278 °C |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Torlon 4301 | |
| Vespel SP-21 |
Frequently Asked Questions
Torlon vs Vespel?
Vespel: higher max temp (300 vs 275°C). Torlon 4301: higher PV (7.0 vs 5.5 MPa·m/s) bei ~60% kosten.
Wie tut Torlon compare zu Vespel polyimide?
Torlon (PAI) ist melt-processable durch injection molding; Vespel (PI) requires compression molding und sintering. Vespel offers higher continuous service temperature (auf zu 310°C vs 260°C für Torlon) und better electrical properties, but Torlon hat higher tensile strength und impact widerstand. Choose Torlon für complex geometries via molding; choose Vespel für extreme temperature oder electrical insulation.
Warum tut Torlon require post-curing?
Torlon undergoes additional imidization reactions nach molding das increase molecular weight und crystallinity. Der molded teil hat nur partial imidization; der staged post-cure completes der reaction, increasing tensile strength von ~100 MPa zu 150-200 MPa und raising der glass transition temperature von ~190°C zu ~275°C. Ohne post-cure, der teil werden nicht achieve sein rated properties.
Können Torlon sein used für bearings ohne external lubrication?
Ja. Torlon bearing grades (4301, 4275, 4630) contain PTFE und graphite internal lubricants das bereitstellen self-lubricating leistung. Torlon 4301 hat ein PV grenze von 1,000,000 psi-fpm — one von der highest von any polymer. Dies makes es suitable für dry-running bearings, bushings, und wear rings in pumps und compressors.
Ist Torlon resistant zu hydraulic fluids?
Ja. Torlon hat excellent widerstand zu hydraulic fluids (Skydrol, MIL-H-5606), synthetic oils, und aviation fuels. Dies chemical widerstand, combined mit sein mechanical strength, makes Torlon ein standard material für hydraulic und kraftstoff system components in aerospace applications.
Was ist der difference zwischen Torlon und Ultem?
Torlon (PAI) und Ultem (PEI) sind beide hoch-temperature amorphous polymers, but Torlon offers significantly higher leistung bei higher kosten. Torlon's Tg ist 275°C vs 217°C für Ultem; Torlon's tensile strength ist 150-200 MPa vs 105 MPa für Ultem. Torlon requires post-curing; Ultem tut nicht. Choose Ultem wenn 180°C service temperature ist sufficient; choose Torlon für extreme conditions über 200°C.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org