PSU Udel Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-05-28
Polysulfone (PSU), commercially known als Solvay Udel, ist der foundational member von der sulfone polymer family—der original hoch-temperature amorphous thermoplastic das established der market für transparent, sterilizable engineering polymers....
Polysulfone (PSU), commercially known als Solvay Udel, ist der foundational member von der sulfone polymer family—der original hoch-temperature amorphous thermoplastic das established der market für transparent, sterilizable engineering polymers. Mit ein glass transition von 185°C und continuous service rating von 160°C, PSU offers der best preis-zu-leistung ratio in der sulfone family, costing significantly less als PES (Tg 225°C) oder PPSU (Tg 220°C) while noch providing excellent hydrolytic stability, clarity, und biocompatibility.
PSU ist der workhorse material für medical gerät manifolds (dialyzer housings, surgical instrument handles), heiß-wasser plumbing fittings, reverse osmosis membrane supports, und food service ausrüstung. Es ist naturally transparent (slight bernstein tint) und maintains clarity nach 1000+ autoclave cycles. PSU ist FDA-compliant für repeated food contact und meets USP Class VI und ISO 10993 biocompatibility standards für medical devices. Der material processes bei melt temperatures von 330-380°C mit mold temperatures von 80-150°C—der higher end von der mold temperature bereich produces unter molded-in stress und better environmental stress crack widerstand (ESCR). Drying bei 135°C für 3-4 hours zu <0.02% moisture is required.
Recommended Anwendungen
PSU Udel ist commonly specified für:
Selection & Application Leitfaden
Polysulfone (PSU) ist ein transparent, hoch-temperature amorphous polymer offering 150°C continuous service, excellent hydrolysis widerstand, und autoclave capability bei unter kosten als PEEK oder Ultem. Choose PSU wenn sie brauchen transparency mit steam sterilization widerstand — es fills der gap zwischen polycarbonate (limited zu 130°C, poor steam widerstand) und Ultem (higher temperature but mehr expensive und bernstein-tinted). PSU ist der standard für medical und food-service applications requiring repeated sterilization.
Real-World Anwendungen
PSU withstands thousands von steam autoclave cycles bei 134°C ohne degradation, making es standard für surgical instrument trays und dental cassette systems.
PSU's biocompatibility, transparency für visual inspection, und widerstand zu blood-contact sterilization machen es der material für hemodialysis komponente housings.
PSU ist FDA-compliant für repeated food contact und withstands commercial dishwashing temperatures — used für coffee machine components, heiß wasser dispensers, und food processing sight glasses.
PSU's clarity, chemical widerstand, und autoclave capability machen es ideal für beakers, filter housings, und andere lab ware das requires repeated sterilization.
Processing & Kosten Considerations
Manufacturing Tips
- PSU processes bei 360-390°C melt temperature mit mold temperatures von 100-150°C. Diese temperatures sind achievable ein standard hoch-temperature injection molding machines — nein special ausrüstung erforderlich.
- PSU müssen sein thoroughly dried vor processing (120-130°C für 3-4 hours) als es ist hygroscopic. Moisture causes splay marks und reduces mechanical properties.
- PSU hat higher melt viscosity als polycarbonate — higher injection pressures und faster fill speeds sind needed. Optimize gate design für adequate flow length, especially für thin-wall teile.
PSU costs $15-35/kg — less als Ultem ($30-80/kg) und significantly less als PEEK ($80-200/kg). Dies positions PSU als ein kosten-effective choice für transparent, sterilizable components. Wenn opacity ist acceptable und higher temperature ist needed, Ultem kann justify sein higher kosten. Wenn transparency und autoclave widerstand sind der primär requirements, PSU ist typically der meiste economical choice.
Technical Eigenschaften
| Dichte | 1.24 g/cm³ |
|---|---|
| Zugfestigkeit | 75 MPa |
| Schmelzpunkt | N/EIN (Amorphous, Tg 185°C) |
| Shrinkage Rate | 0.6-0.7% |
| Flexural Modulus | 2.7 GPa |
| Hdt | 174 °C bei 1.82 MPa |
| Continuous Service Temp | 160 °C |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Solvay Udel PSU | |
| BASF Ultrason S | |
| Sumitomo SumikaExcel PSU |
Frequently Asked Questions
Was ist der environmental stress crack widerstand (ESCR) limitation von PSU?
PSU hat gut chemical widerstand zu aqueous solutions, acids, und bases, but es ist susceptible zu environmental stress cracking (ESC) wenn exposed zu polar organic solvents—particularly ketones (acetone, MEK), esters, chlorinated solvents (methylene chloride), und aromatic hydrocarbons. Der cracking occurs wenn der chemical attacks der polymer while der teil ist unter molded-in oder applied stress. Mitigation: (1) anneal teile nach molding (160°C für 2-4 hours) zu relieve molded-in stresses, (2) avoid drücken-fit oder interference-fit designs das create sustained tensile stress, (3) verwenden radiused internal corners (minimum 0.5 mm radius) zu reduce stress concentration factors. Für applications involving repeated solvent exposure, upgrade zu PPSU (Radel) welche hat significantly better ESCR.
Was ist der difference zwischen PSU, PES, und PPSU?
PSU (polysulfone, Udel) hat 150°C continuous service, excellent clarity, und der lowest kosten von der three. PES (polyethersulfone, Veradel/Ultrason) offers 180°C service und better chemical widerstand bei higher kosten. PPSU (polyphenylsulfone, Radel) provides der highest impact toughness (notch sensitivity 10× better als PSU) und 180°C service. Choose PSU für standard sterilization, PES für higher temperature, PPSU für impact-kritisch medical applications.
Ist PSU truly transparent?
Ja. PSU ist wasser-clear transparent mit ein slight yellow tint, providing better clarity als Ultem (welche ist bernstein-tinted). PSU's licht transmission ist approximately 85-90% für 3mm thickness, suitable für sight glasses und inspection windows.
Wie viele autoclave cycles können PSU withstand?
PSU typically withstands 1,000-2,000 autoclave cycles bei 134°C vor showing significant property degradation. Dies ist far superior zu polycarbonate (50-100 cycles) und comparable zu Ultem. Für applications requiring even mehr cycles, PPSU offers der best autoclave widerstand among transparent polymers.
Können PSU sein bonded oder welded?
Ja. PSU können sein solvent-bonded using methylene chloride oder dichloroethane für strong, clear bonds. Es können auch sein ultrasonically welded und heat-sealed. Solvent bonding ist der meiste gemein joining method für medical gerät assembly.
Ist PSU resistant zu chlorine und chlorinated wasser?
PSU hat gut widerstand zu chlorinated wasser bei moderate temperatures, making es suitable für pool und spa components und wasser treatment ausrüstung. However, prolonged exposure zu heiß chlorinated wasser über 60°C können cause stress cracking. Für continuous heiß chlorinated wasser service, PPSU offers better widerstand.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org