PPS GF40 Reinforced Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-11
PPS GF40 ist der meiste kosten-effective hoch-temperature reinforced thermoplastic — offering 265°C HDT und exceptional chemical widerstand bei 40-50% unter kosten als PEEK GF30. Der workhorse für automotive unter-hood und industrial chemical...
Recommended Anwendungen
PPS GF40 Reinforced ist commonly specified für:
⚠ Nicht Recommended Für
PPS GF40 Reinforced ist nicht recommended für:
- Anwendungen requiring hoch elongation oder ductility (PPS elongation <1% — very brittle at room temperature)
- Strong oxidizing acid environments bei elevated temperature (fuming nitric acid, concentrated sulfuric über 150°C)
- Welded oder bonded assemblies (PPS hat poor weldability — verwenden mechanical fasteners)
Selection & Application Leitfaden
PPS ist der kosten-leistung leader among hoch-temperature semicrystalline polymers, offering 200-240°C continuous service temperature, exceptional chemical widerstand, und inherent flame retardancy bei $15-40/kg — ein fraction von PEEK's kosten. Choose PPS über PEEK wenn temperatures stay unter 200°C und der application prioritizes chemical widerstand und dimensional stability über mechanical toughness. PPS's niedrig elongation (1-3%) und brittleness grenze sein verwenden in impact-loaded applications.
Real-World Anwendungen
PPS withstands unter-hood temperatures, kraftstoff, öl, und coolant exposure while maintaining dimensional stability für precision sensor housings und kraftstoff system components.
PPS's hoch dielectric strength, CTI rating, und UL94 V-0 flammability machen es standard für hoch-temperature electrical connectors in automotive und industrial ausrüstung.
Glass-filled PPS (40% GF) provides der chemical widerstand, stiffness, und temperature capability needed für pumpe impellers handling heiß, corrosive fluids.
PPS's niedrig moisture absorption, chemical widerstand zu hydraulic fluids, und dimensional stability machen es suitable für precision ventil bodies und spools.
Processing & Kosten Considerations
Manufacturing Tips
- PPS processes bei 300-330°C melt temperature mit mold temperatures von 130-150°C. Diese temperatures sind achievable ein meiste standard injection molding machines mit hoch-temperature capability — nein special ausrüstung needed wie PEEK.
- PPS ist highly crystalline und crystallizes rapidly während molding. Form temperature über 130°C ensures adequate crystallinity (>50%) für optimal chemical widerstand und dimensional stability. Unter mold temperatures produce unter crystallinity mit reduced chemical widerstand.
- PPS ist extremely fluid wenn molten — es werden flash durch sehr klein gaps. Molds müssen haben precise parting line fits, und injection pressures sollte sein carefully controlled zu prevent flash. Verwenden von niedrig-pressure holding phase ist recommended.
PPS ist der meiste affordable hoch-temperature polymer bei $15-40/kg (40% glass-filled grade: $20-30/kg). Es costs 4-8× less als PEEK while offering similar chemical widerstand und nur slightly unter temperature capability. PPS's excellent flow characteristics auch reduce molding cycle times und energy costs. Der total system kosten oft favors PPS über metals oder mehr expensive polymers in automotive und chemical processing applications.
Technical Eigenschaften
| Dichte | 1.66 g/cm³ |
|---|---|
| Zugfestigkeit | 160 MPa |
| Schmelzpunkt | 285 °C |
| Shrinkage Rate | 0.2-0.3% |
| Flexural Modulus | 14 GPa |
| Hdt | 265 °C bei 1.82 MPa |
| Continuous Service Temp | 220 °C |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Solvay Ryton R-4-200 | |
| Fortron 1140L4 | |
| DIC PPS FZ-1140 |
Frequently Asked Questions
Ist PPS sicher für food contact?
Einige PPS grades sind FDA-compliant für repeated food contact. However, PPS können contain residual oligomers das migrate bei hoch temperatures. Für food processing ausrüstung über 150°C, PEEK ist preferred despite higher kosten. Für room-temperature chemical processing, PPS ist acceptable und widely used.
Warum ist PPS brittle compared zu PEEK?
PPS hat sehr niedrig elongation bei break (1-3% für glass-filled, 3-5% für unfilled) compared zu PEEK (20-50%). Dies ist inherent zu PPS's highly crystalline, rigid molecular structure. PPS sollte nicht sein used in applications subject zu impact loading oder snap-fit assembly. Wenn toughness ist erforderlich, consider PEEK oder PPA instead.
Können PPS sein used für potable wasser applications?
Ja, spezifisch PPS grades meet NSF/ANSI 61 für potable wasser contact. Fortron PPS (linear typ) ist mehr commonly zertifiziert für wasser applications als cross-linked Ryton PPS. Verify compliance mit der spezifisch grade und manufacturer vor specifying für drinking wasser applications.
Was ist der difference zwischen Ryton und Fortron PPS?
Ryton (Chevron Phillips) ist cross-linked PPS mit slightly higher molecular weight, offering marginally better mechanical properties. Fortron (Celanese, jetzt subsidiary von Qingdao) ist linear PPS mit better weld line strength und less flash während molding. Beide offer similar chemical und thermal widerstand — selection ist typically driven durch availability und spezifisch grade properties.
Tut PPS absorb moisture?
PPS hat exceptionally niedrig moisture absorption (0.02-0.05% bei saturation), one von der lowest among engineering plastics. Dies means excellent dimensional stability in humid environments und nein significant property changes nach wasser exposure. Minimal drying ist needed vor processing (2-3 hours bei 120-150°C ist sufficient).
Können PPS sein welded?
Ja. PPS können sein welded durch vibration welding, ultrasonic welding, und heiß plate welding — alle gemein in automotive sensor und kraftstoff system assembly. Weld strength typically reaches 70-80% von parent material strength. Linear PPS (Fortron) generally welds better als cross-linked PPS (Ryton) due zu mehr consistent melt flow.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org