PFA Ultra-Hoch Purity Güte Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-08
PFA (perfluoroalkoxy) ist der melt-processable sibling von PTFE — es delivers near-identical chemical widerstand while seiend injection-moldable und weldable. Ultra-hoch purity (UHP) PFA grades undergo additional processing zu reduce extractable...
PFA (perfluoroalkoxy) ist der melt-processable sibling von PTFE — es delivers near-identical chemical widerstand while seiend injection-moldable und weldable. Ultra-hoch purity (UHP) PFA grades undergo additional processing zu reduce extractable ions (sodium, potassium, calcium, iron) zu sub-ppb levels, making ihnen der material von choice für semiconductor wet bench components, ultrapure wasser systems, und pharmaceutical API processing ausrüstung. Unlike PTFE welche müssen sein compression-molded und sintered, PFA können sein injection-molded in complex geometries mit glatt, non-porous surfaces das resist biofilm formation. Der continuous service temperature ist unter als PTFE (260°C vs 260°C — sie sind comparable, but PFA loses mechanical properties faster über 200°C).
Recommended Anwendungen
PFA Ultra-Hoch Purity Güte ist commonly specified für:
⚠ Nicht Recommended Für
PFA Ultra-Hoch Purity Güte ist nicht recommended für:
- Kosten-sensitive applications wo FEP oder PTFE suffices (PFA ist 1.5-2× der kosten von FEP)
- Heavy abrasion environments (PFA hat poor wear widerstand; verwenden PTFE-filled PEEK instead)
- Hoch-pressure sealing ohne backup rings (PFA creeps unter sustained load wie alle fluoropolymers)
Selection & Application Leitfaden
PFA (perfluoroalkoxy) ist der premium melt-processable fluoropolymer, combining PTFE-level chemical widerstand und 260°C temperature capability mit injection moldability. Choose PFA über PTFE wenn complex teil geometries require injection molding; über FEP wenn service temperature über 200°C ist needed; über PEEK wenn chemical purity ist paramount und mechanical loads sind moderate. PFA's ultra-hoch purity grades machen es der standard für semiconductor wet processing.
Real-World Anwendungen
Ultra-hoch purity PFA (PFA HP) ist der standard für wet bench components, chemical delivery lines, und wafer carriers in semiconductor fabs — providing <1 ppb metal extractable levels.
PFA's chemical inertness und USP Class VI compliance machen es suitable für single-verwenden bioreactor liner films das contact cell culture media.
PFA tubing und fittings bereitstellen der highest purity und chemical widerstand für aggressive chemical distribution in semiconductor und pharmaceutical manufacturing.
PFA's niedrig extractables und chemical widerstand machen es standard für HPLC tubing, sample loops, und ICP-MS introduction systems wo contamination müssen sein minimized.
Processing & Kosten Considerations
Manufacturing Tips
- PFA processes bei 340-380°C melt temperature mit mold temperatures von 130-160°C. Es hat higher melt viscosity als FEP, requiring higher injection pressures. Der processing window ist narrower als commodity plastics.
- PFA hat niedrig shrinkage (3-4%) und excellent dimensional stability. Form design sollte account für der hoch thermal expansion differential zwischen PFA und steel molds während cooling.
- Für ultra-hoch purity applications, avoid any contamination während processing. Verwenden dedicated PFA-nur processing ausrüstung, und nie laufen andere materials durch der gleich machine vor PFA ohne thorough purging.
PFA ist expensive bei $50-100/kg, mit ultra-hoch purity grades reaching $150+/kg. Dies premium reflects der specialized manufacturing erforderlich zu achieve semiconductor-grade purity. Für semiconductor applications, PFA's purity justifies der kosten — metal contamination von alternative materials würde destroy wafer yields worth millions von dollars. Für less purity-kritisch applications, FEP oder PVDF kann sein mehr kosten-effective.
Technical Eigenschaften
| Dichte | 2.15 g/cm³ |
|---|---|
| Zugfestigkeit | 28 MPa |
| Schmelzpunkt | 305 °C |
| Shrinkage Rate | 3.5-6.0% |
| Flexural Modulus | 0.7 GPa |
| Hdt | 75 °C bei 1.82 MPa |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Teflon PFA 440HP | |
| Hyflon PFA M620 |
Frequently Asked Questions
PFA vs PTFE für semiconductor applications — welche ist better?
PFA für molded components (fittings, ventil bodies, wafer carriers), PTFE für machined components (seals, gaskets, bushings). PFA's melt-processability enables complex, net-shape teile impossible in PTFE. PFA auch hat unter permeation rates — kritisch für ultrapure chemical lines. PTFE ist preferred für wear components wo PFA's unter mechanical strength ist limiting. Für der highest purity requirements, UHP PFA grades von Chemours (Teflon PFA 440HP) oder Solvay (Hyflon PFA) sind der industry standards.
Können PFA sein welded wie PTFE?
PFA ist significantly easier zu weld als PTFE — es können sein butt-welded, socket-welded, und infrared-welded using standard thermoplastic welding ausrüstung. PTFE welding ist notoriously difficult due zu sein extremely hoch melt viscosity. Dies makes PFA der preferred material für assembled fluid handling systems (rohr, fittings, ventil bodies) in semiconductor fabs wo welded joints müssen sein particle-kostenlos und leck-tight.
Was ist der difference zwischen PFA und PTFE?
PFA und PTFE haben nearly identical chemical widerstand und 260°C maximum service temperature. Der key difference: PFA ist melt-processable (können sein injection molded und extruded), while PTFE cannot melt-flow und requires compression molding und sintering. PFA auch hat slightly unter mechanical properties (tensile 28 MPa vs 25 MPa für PTFE — similar) und ist transparent (PTFE ist opaque). PFA costs roughly 2× PTFE.
Was makes PFA 'ultra-hoch purity'?
Ultra-hoch purity PFA (PFA HP/PFA SUPRA) ist manufactured mit special controls zu minimize metal ion content (<1 ppb extractable metals), particle generation, und outgassing. Der resin ist produced in dedicated lines, handled in cleanroom conditions, und tested mit ICP-MS zu certify purity. Dies ist wesentlich für semiconductor manufacturing wo even trace metals cause defects.
Können PFA sein used für continuous service bei 260°C?
Ja. PFA ist rated für continuous verwenden bei 260°C (500°F), gleich als PTFE. Bei dies temperature, PFA maintains useful mechanical properties while meiste andere thermoplastics würde haben melted oder beeinträchtigt. Kurz-term excursions zu 280-300°C sind möglich but reduce service life.
Ist PFA suitable für food processing?
Ja. PFA complies mit FDA 21 CFR 177.1550 für repeated food contact. Es ist used in food processing ausrüstung für heiß-fill lines, conveyor components, und baking surfaces. PFA's non-stick surface und chemical widerstand allow easy cleaning und resist food produkt buildup.
Wie tut PFA compare zu PVDF für kosten-sensitive applications?
PVDF costs roughly half der preis von PFA ($20-50/kg vs $50-100/kg) und offers easier processing bei unter temperatures. However, PVDF hat unter chemical widerstand (attacked durch strong bases und polar solvents) und unter temperature rating (150°C vs 260°C). Choose PVDF wenn ihr chemical environment ist compatible; PFA wenn universal chemical widerstand ist needed.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org