PES Veradel Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-05-27
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature engineering thermoplastic distinguished durch sein combination von natural transparency (licht bernstein, translucent in thin sections),...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature engineering thermoplastic distinguished durch sein combination von natural transparency (licht bernstein, translucent in thin sections), excellent dimensional stability, und outstanding widerstand zu heiß wasser und steam—making es ein preferred material für medical sterilization trays, dairy/food processing components, und heiß-wasser plumbing manifolds. Sein glass transition temperature von 225°C provides ein useful continuous service bereich von 180°C, bridging der gap zwischen polysulfone (PSU, 160°C) und PEEK (260°C).
PES offers superior hydrolytic stability—es withstands repeated steam autoclave cycles (134°C saturated steam) mit minimal property degradation, ein kritisch requirement für reusable medical devices. Es auch exhibits inherent flame retardancy (UL94 V-0 bei 0.8 mm) ohne halogen additives. However, PES hat poor widerstand zu polar organic solvents (ketones, esters, chlorinated solvents)—exposure zu methyl ethyl ketone (MEK), acetone, oder methylene chloride werden cause stress cracking. PES auch hat relatively hoch melt viscosity, requiring robust injection molding machines mit hoch injection pressure capability. Drying bei 150°C für 4 hours zu <0.02% moisture is essential before processing.
Recommended Anwendungen
PES Veradel ist commonly specified für:
Selection & Application Leitfaden
PES (polyethersulfone, Veradel/Ultrason) provides 180°C continuous service temperature — 30°C higher als PSU — mit similar transparency und sterilization capability. Choose PES über PSU wenn higher temperature ist needed; über Ultem wenn transparency ist erforderlich alongside hoch temperature. PES ist der transparent hoch-temperature polymer für demanding medical und electronic applications.
Real-World Anwendungen
PES's hoch HDT (210°C) resists halogen bulb temperatures in headlamp reflectors und fog licht housings while maintaining dimensional stability.
PES withstands autoclave, EtO, und gamma sterilization — used für dental syringes, surgical instrument handles, und fluid handling components requiring repeated sterilization.
PES ist der standard substrate für ultrafiltration und microfiltration membranes due zu sein chemical widerstand, thermal stability, und controlled pore-forming characteristics.
PES meets FAA flammability requirements für aircraft interior panels, luft ducting, und window components requiring transparency und heat widerstand.
Processing & Kosten Considerations
Manufacturing Tips
- PES processes bei 360-390°C melt temperature mit mold temperatures von 120-160°C. Processing requirements sind similar zu PSU but bei slightly higher temperatures.
- PES müssen sein dried bei 130-150°C für 3-4 hours vor processing. Moisture über 0.05% causes splay und reduces clarity und mechanical properties.
- PES hat higher melt viscosity als PSU — higher injection pressures und optimized gate design sind needed. Thin-wall molding requires fast fill speeds und adequate holding pressure.
PES costs $25-55/kg — mehr als PSU ($15-35/kg) but less als Ultem ($30-80/kg). Der premium über PSU ist justified wenn 180°C service temperature oder better chemical widerstand ist needed. PES ist oft der meiste kosten-effective transparent polymer für applications über PSU's temperature grenze.
Technical Eigenschaften
| Dichte | 1.37 g/cm³ |
|---|---|
| Zugfestigkeit | 85 MPa |
| Schmelzpunkt | N/EIN (Amorphous, Tg 225°C) |
| Shrinkage Rate | 0.6-0.7% |
| Flexural Modulus | 2.9 GPa |
| Hdt | 204 °C bei 1.82 MPa |
| Continuous Service Temp | 180 °C |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Solvay Veradel | |
| BASF Ultrason E | |
| Sumitomo SumikaExcel PES |
Frequently Asked Questions
Warum ist PES preferred über polycarbonate (PC) für medical sterilizable teile?
Polycarbonate hat ein glass transition von nur 147°C und undergoes significant embrittlement und yellowing nach 50-100 autoclave cycles bei 134°C—der amorphous structure hydrolyzes, reducing molecular weight und impact widerstand. PES (Tg 225°C) withstands 1000+ autoclave cycles mit minimal property change because sein sulfone backbone (-SO₂-) ist inherently hydrolysis-resistant. Additionally, PES meets der ISO 10993 biocompatibility standard für prolonged patient contact (>30 days), while PC ist generally limited zu kurz-term contact (<24 hours). Der tradeoff: PES costs approximately 3-5× mehr als medical-grade PC und requires higher processing temperatures (340-380°C vs 280-310°C für PC).
Wie tut PES compare zu PSU?
PES offers 30°C higher continuous service temperature (180°C vs 150°C für PSU), better chemical widerstand zu polar solvents, und higher strength bei elevated temperature. PSU hat slightly better hydrolysis widerstand und ist less expensive. Choose PES wenn temperature exceeds PSU's capability; PSU für standard sterilization applications.
Ist PES suitable für membrane filtration?
Ja. PES ist one von der meiste gemein membrane materials für ultrafiltration und microfiltration. Sein controlled phase-inversion behavior creates uniform pore structures, und sein chemical widerstand allows cleaning mit caustic solutions. PES membranes sind used in wasser treatment, bioprocessing, und food/beverage applications.
Können PES sein used für electrical applications?
Ja. PES hat excellent dielectric properties (dielectric strength 16 kV/mm) und hoch CTI wert (>175V). Es ist used für hoch-temperature electrical connectors, coil bobbins, und switchgear components. PES inherently achieves UL94 V-0 bei 0.4mm ohne flame retardant additives.
Wie tut PES compare zu Ultem?
PES provides 180°C continuous service vs Ultem's 170°C, und PES ist transparent bernstein while Ultem ist mehr bernstein/opaque. Ultem hat better processability (wider processing window) und unter kosten. PES hat better chemical widerstand zu automotive fluids. Choose PES für transparency und temperature; Ultem für kosten und ease von processing.
Was ist der difference zwischen Veradel und Ultrason PES?
Veradel (Solvay/Quadra) und Ultrason E (BASF) sind beide PES resins mit similar base properties. Veradel offers mehr specialty grades including niedrig-extractable medical und hoch-purity semiconductor grades. Ultrason hat broader availability in Europe. Beide meet der gleich ASTM und ISO standards für PES.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PSU Udel: Polysulfone Hoch-Clarity Medical & Food-Güte...
Polysulfone (PSU), commercially known als Solvay Udel, ist der foundational member von der sulfone polymer family—der...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org