PES Ultrason E Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-12
PES offers der best combination von hoch-temperature leistung, transparency, und hydrolytic stability among amorphous polymers — der standard für medical sterilization trays und heiß wasser plumbing.Propprose Processability Score (PPS): 6/10...
Recommended Anwendungen
PES Ultrason E ist commonly specified für:
Selection & Application Leitfaden
PES (polyethersulfone, Veradel/Ultrason) provides 180°C continuous service temperature — 30°C higher als PSU — mit similar transparency und sterilization capability. Choose PES über PSU wenn higher temperature ist needed; über Ultem wenn transparency ist erforderlich alongside hoch temperature. PES ist der transparent hoch-temperature polymer für demanding medical und electronic applications.
Real-World Anwendungen
PES's hoch HDT (210°C) resists halogen bulb temperatures in headlamp reflectors und fog licht housings while maintaining dimensional stability.
PES withstands autoclave, EtO, und gamma sterilization — used für dental syringes, surgical instrument handles, und fluid handling components requiring repeated sterilization.
PES ist der standard substrate für ultrafiltration und microfiltration membranes due zu sein chemical widerstand, thermal stability, und controlled pore-forming characteristics.
PES meets FAA flammability requirements für aircraft interior panels, luft ducting, und window components requiring transparency und heat widerstand.
Processing & Kosten Considerations
Manufacturing Tips
- PES processes bei 360-390°C melt temperature mit mold temperatures von 120-160°C. Processing requirements sind similar zu PSU but bei slightly higher temperatures.
- PES müssen sein dried bei 130-150°C für 3-4 hours vor processing. Moisture über 0.05% causes splay und reduces clarity und mechanical properties.
- PES hat higher melt viscosity als PSU — higher injection pressures und optimized gate design sind needed. Thin-wall molding requires fast fill speeds und adequate holding pressure.
PES costs $25-55/kg — mehr als PSU ($15-35/kg) but less als Ultem ($30-80/kg). Der premium über PSU ist justified wenn 180°C service temperature oder better chemical widerstand ist needed. PES ist oft der meiste kosten-effective transparent polymer für applications über PSU's temperature grenze.
Technical Eigenschaften
| Dichte | 1.37 g/cm³ |
|---|---|
| Zugfestigkeit | 85 MPa |
| Schmelzpunkt | N/EIN (Amorphous, Tg 225°C) |
| Shrinkage Rate | 0.6-0.7% |
| Flexural Modulus | 2.9 GPa |
| Hdt | 204 °C bei 1.82 MPa |
| Continuous Service Temp | 180 °C |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| BASF Ultrason E 3010 | |
| Solvay Veradel |
Frequently Asked Questions
PES vs PPSU — wenn zu choose welche?
PPSU hat higher impact widerstand (690 vs 85 J/m) und better ESCR zu disinfectants. PES hat slightly higher Tg (225°C vs 220°C), better transparency (lighter bernstein tint), und ist 20-30% unter kosten. Für medical devices requiring maximum toughness und chemical widerstand, PPSU. Für sterilization trays und plumbing wo transparency und kosten sind priorities, PES.
Wie tut PES compare zu PSU?
PES offers 30°C higher continuous service temperature (180°C vs 150°C für PSU), better chemical widerstand zu polar solvents, und higher strength bei elevated temperature. PSU hat slightly better hydrolysis widerstand und ist less expensive. Choose PES wenn temperature exceeds PSU's capability; PSU für standard sterilization applications.
Ist PES suitable für membrane filtration?
Ja. PES ist one von der meiste gemein membrane materials für ultrafiltration und microfiltration. Sein controlled phase-inversion behavior creates uniform pore structures, und sein chemical widerstand allows cleaning mit caustic solutions. PES membranes sind used in wasser treatment, bioprocessing, und food/beverage applications.
Können PES sein used für electrical applications?
Ja. PES hat excellent dielectric properties (dielectric strength 16 kV/mm) und hoch CTI wert (>175V). Es ist used für hoch-temperature electrical connectors, coil bobbins, und switchgear components. PES inherently achieves UL94 V-0 bei 0.4mm ohne flame retardant additives.
Wie tut PES compare zu Ultem?
PES provides 180°C continuous service vs Ultem's 170°C, und PES ist transparent bernstein while Ultem ist mehr bernstein/opaque. Ultem hat better processability (wider processing window) und unter kosten. PES hat better chemical widerstand zu automotive fluids. Choose PES für transparency und temperature; Ultem für kosten und ease von processing.
Was ist der difference zwischen Veradel und Ultrason PES?
Veradel (Solvay/Quadra) und Ultrason E (BASF) sind beide PES resins mit similar base properties. Veradel offers mehr specialty grades including niedrig-extractable medical und hoch-purity semiconductor grades. Ultrason hat broader availability in Europe. Beide meet der gleich ASTM und ISO standards für PES.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org