PC/ABS Blend Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-02
PC/ABS blends combine PC impact strength + ABS processability. Dominant für laptop housings, auto interior trim, electrical enclosures. Dry bei 100°C für 3h; melt 250-270°C; mold 60-80°C. ~30% cheaper als pure PC.Propprose Processability Score...
PC/ABS blends combine PC impact strength + ABS processability. Dominant für laptop housings, auto interior trim, electrical enclosures. Dry bei 100°C für 3h; melt 250-270°C; mold 60-80°C. ~30% cheaper als pure PC.
Recommended Anwendungen
PC/ABS Blend ist commonly specified für:
⚠ Nicht Recommended Für
PC/ABS Blend ist nicht recommended für:
- Continuous outdoor UV exposure ohne UV coating (yellows und loses impact strength rapidly)
- Kontakt mit aromatic hydrocarbons, ketones, oder esters (causes environmental stress cracking)
- Steam sterilization über 120°C (verwenden PSU oder PPSU für autoclave applications instead)
Selection & Application Leitfaden
Polycarbonate (PC) ist der transparent engineering plastic mit der highest impact strength — virtually unbreakable in thin sections. Choose PC über acrylic (PMMA) wenn impact widerstand ist needed; über PSU wenn unter kosten und higher clarity matter und steam sterilization isn't erforderlich. PC's haupt limitations sind poor chemical widerstand zu solvents und UV degradation ohne stabilization. Für higher temperature oder flame widerstand, consider PC/ABS blend oder Ultem.
Real-World Anwendungen
PC's exceptional impact strength (850 J/m notched Izod) und optical clarity machen es der standard für safety helmets, riot shields, und protective visors.
PC's optical clarity, impact widerstand, und thermal stability für halogen bulb environments machen es der dominant material für headlamp äußere lenses worldwide.
PC und PC/ABS blends bereitstellen der combination von impact strength, flame retardancy (mit additives), und surface finish quality für laptop, telefon, und tablet housings.
PC's clarity für visual inspection, gamma sterilizability, und impact toughness suit es für IV components, blood centrifuge housings, und diagnostic gerät enclosures.
Processing & Kosten Considerations
Manufacturing Tips
- PC processes bei 280-320°C melt temperature mit mold temperatures von 80-100°C. Thorough drying ist wesentlich (120°C für 3-4 hours zu <0.02% moisture) — PC ist sehr hygroscopic und even klein amounts von moisture cause splay marks und reduced impact strength.
- PC hat hoch melt viscosity — higher injection pressures und larger gates sind needed compared zu commodity plastics. Thin-wall molding kann require fast injection speeds zu prevent premature freeze-aus.
- Design teile mit uniform wall thickness zu prevent sink marks und internal stresses. PC ist notch-sensitive — avoid sharp internal corners (verwenden R>0.5mm fillets) zu maintain impact strength.
PC costs $5-12/kg — mehr als ABS ($2-5/kg) but less als PSU ($15-35/kg). PC/ABS blends offer ein middle ground bei $3-7/kg mit better flow und processability. Für applications requiring beide transparency und impact widerstand, PC hat nein kosten-effective substitute. Für opaque applications, PC/ABS ist oft ein better wert proposition.
Technical Eigenschaften
| Dichte | 1.14 g/cm³ |
|---|---|
| Zugfestigkeit | 55 MPa |
| Schmelzpunkt | Amorph (Tg 105-147°C) |
| Shrinkage Rate | 0.5-0.7% |
| Flexural Modulus | 2.4 GPa |
| Hdt | 110 °C bei 1.82 MPa |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Bayblend T65 | |
| Cycoloy C6200 |
Frequently Asked Questions
Advantage über pure PC?
Better flow, ~30% cheaper, better chemical widerstand, reduced notch sensitivity. Trade-aus: unter HDT, opaque.
Was ist der difference zwischen PC und PMMA (acrylic)?
PC hat viel higher impact strength (850 J/m vs 16 J/m für PMMA) und higher service temperature (115°C vs 85°C). PMMA hat better optical clarity (92% vs 88% transmission), better UV widerstand, und unter kosten. Choose PC wenn impact widerstand ist kritisch; PMMA für display applications wo optical quality und UV stability matter mehr.
Können PC sein autoclaved?
Nicht recommended. Norm PC softens und distorts bei autoclave temperatures (134°C). Es können withstand ein wenige cycles but rapidly degrades. Für steam sterilization, verwenden PSU, PPSU, oder Ultem instead. PC ist compatible mit EtO und gamma sterilization für single-verwenden medical devices.
Warum tut PC stress-crack in der presence von solvents?
PC ist highly susceptible zu environmental stress cracking wenn exposed zu solvents (gasoline, acetone, MEK) while unter mechanical stress. Der solvent migrates in der polymer bei stress concentration points, causing microcracks das propagate rapidly. Für solvent-exposed applications, specify stress-annealed teile oder verwenden ein chemically resistant alternative (PPS, PPSU, oder PEEK).
Ist BPA-kostenlos polycarbonate available?
Ja. BPA-kostenlos copolyester alternatives (Tritan, PCTG) bereitstellen similar clarity und impact widerstand ohne bisphenol-EIN. Diese materials sind increasingly specified für food contact und children's products. However, sie haben unter temperature widerstand als standard PC und kann nicht sein suitable für alle PC applications.
Was ist PC/ABS blend und wenn sollte I verwenden es?
PC/ABS blend combines PC's impact widerstand und heat widerstand mit ABS's processability und unter kosten. Der blend offers better flow (easier thin-wall molding), unter melt temperature, und unter kosten als pure PC. Es ist der dominant material für electronic gerät housings. Verwenden pure PC wenn transparency ist needed; PC/ABS für opaque structural und housing applications.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org