PAR Polyarylate U-Polymer Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-10
Polyarylate (PAR) ist ein wholly aromatic polyester developed durch Unitika (Japan) und marketed als U-Polymer seit 1973. Es uniquely combines der hoch heat widerstand von polysulfone (Tg 193 °C) mit der transparency von polycarbonate und inherent UV...
Polyarylate (PAR) ist ein wholly aromatic polyester developed durch Unitika (Japan) und marketed als U-Polymer seit 1973. Es uniquely combines der hoch heat widerstand von polysulfone (Tg 193 °C) mit der transparency von polycarbonate und inherent UV widerstand ohne requiring UV stabilizer additives — ein rare combination für outdoor transparent applications, automotive lighting reflectors, und medical devices requiring repeated autoclave sterilization.
Unitika U-Polymer ist one von Japan's lesser-known but strategically wichtig specialty polymers. Unlike polycarbonate welche yellows significantly nach UV exposure ohne UV stabilizers, PAR's molecular structure contains ein intrinsic UV-absorbing benzophenone moiety — dort ist nein stabilizer zu leach aus oder degrade über time. Dies makes PAR ideal für LED lighting lenses, automotive headlamp reflectors, und outdoor sensor housings requiring 10+ year outdoor lifespans.
U-Polymer offers ein continuous service temperature von 150 °C — well über polycarbonate (120 °C) und approaching polysulfone (160 °C) — while maintaining 87% visible licht transmission. Sein excellent flow characteristics enable molding von thin-wall teile ab zu 0.5 mm, kritisch für compact stecker housings. Der material ist inherently flame-retardant (UL 94 V-0 bei 1.5 mm) ohne halogen oder phosphorus additives.
Processing: Melt temperature 340-370 °C, mold temperature 120-150 °C. Pre-drying bei 140 °C für 5 hours ist wesentlich — PAR hydrolyzes wenn processed mit moisture. Hoch-temperature machine capability (ceramic heaters, capable von 380 °C) ist erforderlich.
Technical Eigenschaften
| Dichte | 1.21 g/cm³ |
|---|---|
| Zugfestigkeit | 70 MPa |
| Schmelzpunkt | N/EIN (Amorphous, Tg 193 °C) |
| Shrinkage Rate | 0.6-0.8% |
| Flexural Modulus | 2.3 GPa |
| Hdt | 175 °C bei 1.82 MPa |
| Licht Getriebe | 87% (visible spectrum) |
| Uv Widerstand | Excellent (inherent UV absorber) |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Unitika U-Polymer U-100 | |
| Unitika U-Polymer P-1001 |
Frequently Asked Questions
Wie tut PAR compare zu polycarbonate für outdoor transparent applications?
PAR outperforms PC in three key aspects für outdoor verwenden: (1) inherent UV widerstand — nein stabilizer additives needed, nein yellowing über time; (2) higher heat widerstand (Tg 193 °C vs 147 °C für PC); (3) better chemical widerstand zu cleaning agents und automotive fluids. PC ist 50-70% less expensive und offers better impact widerstand.
Warum ist Unitika der nur major commercial producer von polyarylate?
PAR's niche position zwischen PC (unter kosten, better impact) und PSU/PES (higher heat, opaque) means sein addressable market ist smaller als either. Unitika commercialized U-Polymer in 1973 und optimized der manufacturing process, though der hoch processing temperature (340-370 °C) limits der number von molders wer können arbeiten mit der material.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org