PA12 Nylon Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-02
PA12 hat lowest moisture absorption von any polyamide (0.25% vs 2.5-3.0% für PA66). Material von choice für kraftstoff lines, luft brake tubing, pneumatic schlauch. Excellent hydrocarbon widerstand. Process bei 190-240°C.Propprose Processability Score (PPS):...
PA12 hat lowest moisture absorption von any polyamide (0.25% vs 2.5-3.0% für PA66). Material von choice für kraftstoff lines, luft brake tubing, pneumatic schlauch. Excellent hydrocarbon widerstand. Process bei 190-240°C.
Recommended Anwendungen
PA12 Nylon ist commonly specified für:
⚠ Nicht Recommended Für
PA12 Nylon ist nicht recommended für:
- Moisture-kritisch dimensional applications ohne post-molding conditioning (nylon absorbs auf zu 8% moisture, changing dimensions 0.5-2%)
- Strong acid oder oxidizing environments (mineral acids attack nylon; verwenden PVDF oder PTFE)
- Electrical insulation in humid environments (moisture absorption degrades dielectric properties)
Selection & Application Leitfaden
Nylon (PA6/PA66) ist der workhorse engineering plastic — offering der best balance von mechanical strength, toughness, wear widerstand, und kosten für allgemein industrial applications. Choose PA66 über PA6 wenn higher temperature widerstand und stiffness sind needed; choose PA6 wenn impact widerstand und flexibility matter mehr. Beide absorb moisture significantly (2-3%), welche affects dimensions und properties — consider dies in ihr design.
Real-World Anwendungen
Glass-filled PA66 (30% GF) provides der temperature widerstand (HDT 255°C bei 0.45 MPa), stiffness, und unter-hood chemical widerstand für motor covers und luft ansaugung manifolds bei 4-8× unter kosten als PEEK.
Cast nylon (PA6) provides quiet operation, inherent lubricity, und wear widerstand für gears, sprockets, und bearing surfaces in conveyor und packaging ausrüstung.
PA66 mit flame retardant additives meets UL94 V-0 für electrical connectors und terminal blocks bei viel unter kosten als hoch-temperature alternatives.
PA6/PA66's combination von strength, flexibility, und weatherability makes es der universal material für cable ties, zip ties, und plastic fasteners in construction und electrical installations.
Processing & Kosten Considerations
Manufacturing Tips
- Nylon ist hygroscopic und müssen sein thoroughly dried vor processing (80-100°C für 4-6 hours für PA6, 80°C für 3-4 hours für PA66). Moisture über 0.2% causes splay marks und reduced molecular weight due zu hydrolysis. Verwenden dehumidifying dryers für consistent results.
- Nylon's moisture absorption affects dimensions — teile können grow 0.5-1.0% in length nach conditioning zu 50% RH. Design molds zu account für post-molding dimensional changes, oder specify condition der teile vor kritisch assembly operations.
- Glass-filled nylons (30% GF) require hardened mold surfaces (P20 oder H13 steel) und hardened screw tips due zu abrasive wear. Expect 2-3× faster mold wear compared zu unfilled nylon processing.
Nylon ist among der meiste affordable engineering plastics bei $3-8/kg für unfilled grades und $6-15/kg für glass-filled grades. Dies 10-30× kosten advantage über PEEK makes nylon der default choice für der vast majority von mechanical applications unter 120°C. Wenn higher temperature widerstand ist needed, consider PA46 (Stanyl, $15-25/kg) oder PPA ($12-25/kg) vor jumping zu PEEK.
Technical Eigenschaften
| Dichte | 1.01 g/cm³ |
|---|---|
| Zugfestigkeit | 50 MPa |
| Schmelzpunkt | 178 °C |
| Shrinkage Rate | 0.5-1.0% |
| Flexural Modulus | 1.4 GPa |
| Hdt | 55 °C bei 1.82 MPa |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Vestamid L | |
| Rilsan PA12 |
Frequently Asked Questions
PA12 vs PA11?
PA11 ist bio-based (castor öl); PA12 ist petroleum-based. PA11 slightly better chemical widerstand; PA12 slightly unter density. Kosten und availability typically fahren der choice.
Was ist der difference zwischen PA6 und PA66?
PA66 hat ein higher melting point (260°C vs 220°C für PA6), higher stiffness, und better chemical widerstand. PA6 hat better impact widerstand, better surface finish, und faster molding cycle times. Für meiste structural applications über 80°C, PA66 ist preferred. PA6 ist chosen für sein toughness und unter kosten in less demanding applications.
Wie tut moisture affect nylon properties?
Moisture acts als ein plasticizer in nylon — conditioned (50% RH) PA66 hat 50% unter tensile strength als dry-als-molded but 2-3× higher impact strength. Dies means dry nylon ist strong but brittle; conditioned nylon ist tougher but weaker. Immer specify whether mechanical properties sind dry oder conditioned für ihr application.
Können nylon sein used für food contact?
Ja. Spezifisch PA6 und PA66 grades comply mit FDA 21 CFR 177.1500 für food contact. Natural (unpigmented) grades sind meiste commonly zertifiziert. Glass-filled und flame-retardant grades kann nicht sein compliant — verify mit der manufacturer. Nylon ist widely used in food processing machinery components.
Ist nylon resistant zu UV exposure?
Unprotected nylon degrades unter UV exposure, losing tensile strength und becoming discolored. Für outdoor applications, specify UV-stabilized grades mit carbon black oder hindered amine licht stabilizers (HALS). Carbon black provides der best UV protection but limits color options. HALS allow lighter colors mit moderate UV widerstand.
Was ist der difference zwischen extruded und cast nylon?
Extruded nylon (PA6 oder PA66) ist produced durch melt extrusion und hat consistent properties. Cast nylon (PA6G, auch called MC nylon) ist produced durch anionic polymerization in ein mold, yielding higher molecular weight und better mechanical properties — approximately 20% higher tensile strength und 30% better impact widerstand. Cast nylon ist used für large-diameter rods, tubes, und custom shapes.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org