FEP Fluorinated Ethylene Propylene Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-05-30
Fluorinated ethylene propylene (FEP) ist ein fully fluorinated melt-processable fluoropolymer—ein copolymer von tetrafluoroethylene (TFE) und hexafluoropropylene (HFP). Der HFP comonomer introduces -CF₃ seite groups das disrupt der PTFE crystal...
Fluorinated ethylene propylene (FEP) ist ein fully fluorinated melt-processable fluoropolymer—ein copolymer von tetrafluoroethylene (TFE) und hexafluoropropylene (HFP). Der HFP comonomer introduces -CF₃ seite groups das disrupt der PTFE crystal lattice, reducing crystallinity von PTFE's ~90% zu FEP's ~50-70% und enabling conventional melt processing while maintaining der fully fluorinated chemistry das provides near-universal chemical widerstand. In effect, FEP ist der melt-processable version von PTFE—es offers PTFE-level chemical inertness in ein form das können sein injection molded, extruded, und thermoformed.
FEP ist naturally transparent (der reduced crystallinity allows visible licht transmission), welche ist ein distinguishing feature among fluoropolymers—PTFE und PFA sind opaque white. Dies transparency makes FEP der material von choice für chemical process sight glasses, laboratory tubing wo fluid visibility ist erforderlich, und molded components für analytical instruments. FEP processes bei melt temperatures von 330-370°C mit mold temperatures von 150-200°C. Sein continuous service temperature von 200°C ist unter als PTFE/PFA (260°C) due zu der reduced crystallinity, but dies ist sufficient für meiste chemical processing und laboratory applications. FEP's haupt limitation ist niedrig mechanical strength (23 MPa tensile, der lowest among engineering fluoropolymers) und susceptibility zu stress cracking bei elevated temperature unter sustained load.
Recommended Anwendungen
FEP Fluorinated Ethylene Propylene ist commonly specified für:
⚠ Nicht Recommended Für
FEP Fluorinated Ethylene Propylene ist nicht recommended für:
- Hoch-pressure sealing applications (FEP creeps mehr als PTFE — unter melt viscosity means mehr kalt flow)
- Structural applications (tensile strength nur 20-30 MPa; verwenden PEEK oder PEI instead)
- Anwendungen requiring stiffness (FEP ist significantly less stiff als PTFE oder PFA)
Selection & Application Leitfaden
FEP (fluorinated ethylene propylene) ist der transparent, melt-processable fluoropolymer das bridges der gap zwischen PTFE und commodity plastics. Choose FEP wenn sie brauchen PTFE-wie chemical widerstand und non-stick properties in ein melt-processable, transparent form. FEP's 200°C service temperature ist unter als PTFE's 260°C, but sein processability und transparency öffnen applications das PTFE cannot serve.
Real-World Anwendungen
FEP's transparency für fluid visibility, chemical inertness, und non-stick surface machen es standard für laboratory transfer tubing und peristaltic pumpe applications.
FEP provides excellent dielectric properties und flame widerstand für plenum-rated communications cable und hoch-frequency coaxial cable insulation.
FEP's non-stick surface und chemical widerstand suit es für roller coverings in fusing, laminating, und processing ausrüstung wo material müssen nicht adhere.
FEP's ultra-hoch purity grades und chemical widerstand zu etching acids machen es suitable für wafer processing baskets und carriers.
Processing & Kosten Considerations
Manufacturing Tips
- FEP processes bei 340-380°C melt temperature — achievable ein standard hoch-temperature ausrüstung. Es hat gut melt flow für ein fluoropolymer, enabling injection molding und extrusion von complex shapes das PTFE cannot achieve.
- FEP hat niedrig melt strength — es tends zu sag während extrusion. Verwenden unter nehmen-auf speeds und ordnungsgemäß cooling für consistent tubing und profile dimensions. Die design müssen account für significant die swell.
- FEP adheres poorly zu meiste substrates. Surface treatment (sodium etching oder plasma) ist erforderlich für bonding oder coating applications. Mechanical interlocking ist preferred für non-adhesive applications.
FEP costs $40-80/kg — mehr als ETFE ($30-60/kg) but less als PFA ($50-100/kg). FEP offers PTFE-wie properties bei ein unter total processing kosten due zu melt processability. Für applications requiring transparency plus chemical widerstand unter 200°C, FEP ist typically der meiste economical fluoropolymer choice.
Technical Eigenschaften
| Dichte | 2.15 g/cm³ |
|---|---|
| Zugfestigkeit | 23 MPa |
| Schmelzpunkt | 260 °C |
| Shrinkage Rate | 3.0-5.0% |
| Flexural Modulus | 0.5 GPa |
| Hdt | 55 °C bei 1.82 MPa |
| Continuous Service Temp | 200 °C |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Chemours Teflon FEP | |
| Dyneon FEP | |
| Daikin Neoflon FEP |
Frequently Asked Questions
Wenn sollte I specify FEP über PFA für ein fluoropolymer application?
FEP ist preferred über PFA wenn (1) optical transparency ist erforderlich—FEP ist naturally clear, PFA ist opaque white; (2) der application temperature ist unter 200°C, making PFA's 260°C rating unnecessary; (3) kosten ist ein significant factor—FEP ist typically 20-30% less expensive als PFA. PFA ist preferred wenn (1) der application requires der full 260°C continuous service temperature; (2) higher mechanical strength bei temperature ist needed (PFA retains ~15% higher tensile bei 200°C als FEP); (3) flex life ist kritisch—FEP hat ein unter flexural modulus but ist mehr prone zu flex cracking über repeated cycling; (4) der application involves permeation-sensitive environments—PFA's unter gas permeability (~50% less als FEP) ist kritisch für ultra-hoch-purity semiconductor chemical delivery.
Wie tut FEP compare zu PFA?
Beide sind melt-processable fluoropolymers mit similar chemical widerstand. PFA offers higher service temperature (260°C vs 200°C für FEP) und better mechanical properties bei elevated temperature. FEP ist less expensive, mehr transparent, und easier zu process. Choose FEP wenn temperatures stay unter 200°C; PFA für higher temperatures.
Ist FEP sicher für food contact?
Ja. FEP complies mit FDA 21 CFR 177.1550 für repeated food contact. Es ist auch USP Class VI zertifiziert für medical gerät applications. FEP's non-porous surface und chemical inertness prevent contamination und allow easy cleaning.
Können FEP sein used für hoch-frequency applications?
Ja. FEP hat ein sehr niedrig dielectric constant (2.1) und dissipation factor (0.0002) das remain stable across frequencies von 1 kHz zu 10 GHz. Dies makes FEP standard insulation für coaxial cables, microwave transmission lines, und hoch-frequency testen ausrüstung.
Was colors sind available für FEP?
Natural FEP ist wasser-clear transparent. Es können sein pigmented in various colors für draht identification, but colorants kann slightly reduce chemical widerstand und purity. Für semiconductor und pharmaceutical applications, natural (unpigmented) FEP ist standard.
Wie tut FEP handle cryogenic temperatures?
FEP remains flexible und retains sein mechanical properties ab zu -200°C, making es suitable für cryogenic fluid transfer lines und liquid nitrogen handling ausrüstung. Unlike viele polymers, FEP tut nicht become brittle bei cryogenic temperatures.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org