ETFE Tefzel Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-05-30
Ethylene tetrafluoroethylene (ETFE), best known durch Chemours' trade name Tefzel, ist ein partially fluorinated copolymer von ethylene und tetrafluoroethylene das occupies ein unique position in der fluoropolymer family: es offers approximately 2× der...
Ethylene tetrafluoroethylene (ETFE), best known durch Chemours' trade name Tefzel, ist ein partially fluorinated copolymer von ethylene und tetrafluoroethylene das occupies ein unique position in der fluoropolymer family: es offers approximately 2× der tensile strength (45 MPa) und significantly higher impact widerstand als fully fluorinated PTFE oder PFA, while retaining excellent chemical widerstand (superior zu meiste non-fluorinated polymers, though nicht als universal als PTFE/PFA). Der ethylene comonomer introduces hydrogen atoms in der otherwise fully fluorinated backbone, breaking auf der crystallinity und providing ein tougher, lighter, und mehr processable material bei der tradeoff von reduced ober service temperature (150°C vs 260°C für PTFE/PFA) und slightly reduced chemical widerstand.
ETFE ist meiste famous für sein architectural application als transparent membrane roofing—der Eden Project biomes in der UK, der Beijing National Aquatics Center (Wasser Cube), und Allianz Arena in Munich alle verwenden ETFE film cushions. In industrial applications, ETFE ist widely used für rotomolded chemical storage tanks, draht und cable jacketing für aerospace (hoch strength-zu-weight, radiation crosslinkable für improved temperature rating), und chemical process vessel linings. ETFE können sein processed durch conventional injection molding, extrusion, und rotomolding bei melt temperatures von 290-340°C. Unlike PTFE, ETFE können sein radiation crosslinked zu improve sein hoch-temperature creep widerstand und abrasion widerstand—crosslinked ETFE draht insulation ist der standard für aerospace hookup draht (MIL-W-22759 specification).
Recommended Anwendungen
ETFE Tefzel ist commonly specified für:
⚠ Nicht Recommended Für
ETFE Tefzel ist nicht recommended für:
- Anwendungen requiring ultra-niedrig friction coefficient (ETFE friction ~0.4 vs PTFE ~0.05; verwenden PTFE für bearings)
- Continuous service über 150°C (verwenden PFA oder PEEK für higher temperature)
- Strong polar solvent exposure bei elevated temperature (verwenden PTFE oder PFA für aggressive chemical environments)
Selection & Application Leitfaden
ETFE (Tefzel) ist der hoch-strength fluoropolymer choice für draht und cable insulation, architectural membranes, und chemical lining applications wo PTFE's mechanical weakness ist ein problem. Choose ETFE über PTFE wenn tensile strength (45 MPa vs 25 MPa) und abrasion widerstand sind needed; über PFA wenn unter kosten und higher mechanical toughness matter und der 150°C service temperature ist sufficient. ETFE ist auch der meiste radiation-resistant fluoropolymer.
Real-World Anwendungen
ETFE's combination von electrical properties, flame widerstand (limiting oxygen index 31%), und mechanical toughness makes es standard für MIL-W-22759 aircraft wiring.
ETFE film ist used für iconic building facades (Beijing Wasser Cube, Eden Project) providing 95% licht transmission, self-cleaning, und 30+ year weathering widerstand.
ETFE film provides UV-resistant, hoch-transmission vorne sheets für flexible und building-integrated photovoltaic modules.
ETFE lining provides chemical widerstand similar zu PTFE mit better mechanical strength und weldability für tank und vessel lining in chemical processing.
Processing & Kosten Considerations
Manufacturing Tips
- ETFE processes bei 270-310°C melt temperature mit mold temperatures von 80-120°C — unter als PFA und achievable ein standard hoch-temperature injection molding machines.
- ETFE können sein extruded in film (ab zu 12μm thickness), draht coating, und tubing. Es hat ein relatively narrow processing window compared zu commodity plastics — precise temperature steuerung ist wichtig.
- ETFE ist der meiste radiation-resistant fluoropolymer, maintaining properties nach gamma und electron-beam sterilization. Dies makes es suitable für nuclear und space applications wo andere fluoropolymers degrade.
ETFE costs $30-60/kg — mehr als commodity plastics but less als PFA ($50-100/kg) und viel less als PEEK. Für draht insulation, ETFE provides der best balance von leistung und kosten among fluoropolymers. ETFE architectural film ist expensive per square meter but offers 30+ year service life mit minimal maintenance, reducing total lifecycle kosten compared zu glass oder metal facades.
Technical Eigenschaften
| Dichte | 1.70 g/cm³ |
|---|---|
| Zugfestigkeit | 45 MPa |
| Schmelzpunkt | 260 °C |
| Shrinkage Rate | 2.0-3.0% |
| Flexural Modulus | 1.2 GPa |
| Hdt | 75 °C bei 1.82 MPa |
| Continuous Service Temp | 150 °C |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Chemours Tefzel | |
| Dyneon ETFE | |
| Daikin Neoflon ETFE |
Frequently Asked Questions
Was sind der practical differences zwischen ETFE und PTFE für draht und cable insulation?
ETFE dominates aerospace und mass-transit draht insulation für three reasons: (1) Mechanical toughness—ETFE's tensile strength (45 MPa) ist approximately 2× PTFE's (25 MPa) und sein abrasion widerstand ist far superior, kritisch für draht bundles subject zu vibration. (2) Weight—ETFE's density (1.70 g/cm³) ist 23% unter als PTFE (2.20 g/cm³), saving kilograms ein aircraft wiring harnesses. (3) Radiation crosslinking—ETFE können sein crosslinked via electron beam irradiation, raising sein continuous service temperature von 150°C zu 200°C und dramatically improving cut-durch widerstand. PTFE cannot sein crosslinked—es chain-scissions (degrades) unter radiation. PTFE ist noch preferred für hoch-frequency (RF/microwave) coaxial cables wo sein unter dielectric constant (2.1 vs 2.6 für ETFE) und unter dissipation factor (0.0002 vs 0.005) matter.
Wie tut ETFE compare zu PTFE für draht insulation?
ETFE hat 2× higher tensile strength (45 MPa vs 25 MPa), better abrasion widerstand, und können sein extruded als draht insulation (PTFE requires paste extrusion und sintering). PTFE offers better chemical widerstand und higher temperature rating (260°C vs 150°C für ETFE). Für aerospace wiring unter 150°C, ETFE ist standard; für extreme temperature oder chemical environments, PTFE ist specified.
Können ETFE sein welded?
Ja. ETFE können sein heat-welded, extrusion-welded, und impulse-welded — ein significant advantage über PTFE welche cannot sein welded. Dies makes ETFE ideal für tank lining systems und architectural membrane seams wo weldable joints sind erforderlich.
Ist ETFE suitable für outdoor applications?
Ja. ETFE hat outstanding UV und weather widerstand mit minimal property degradation über 30+ years von outdoor exposure. Es tut nicht yellow oder become brittle wie viele transparent polymers. ETFE film maintains >90% licht transmission nach decades von outdoor service.
Was ist der difference zwischen ETFE und FEP?
ETFE hat higher mechanical strength (45 MPa vs 30 MPa tensile), better abrasion widerstand, und better radiation widerstand. FEP hat better chemical widerstand (fully fluorinated), unter coefficient von friction, und higher maximum service temperature (200°C vs 150°C). Choose ETFE für mechanical/wear applications; FEP für chemical/temperature applications.
Ist ETFE recyclable?
Ja. ETFE ist thermoplastic und können sein melted und reprocessed multiple times ohne significant property degradation. Dies ist ein environmental advantage über thermoset materials. ETFE architectural membranes können sein recycled bei end von life, contributing zu sustainable building certifications.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org