ETFE Hoch-Flex-Life Güte Eigenschaften — Complete Engineering Daten Sheet (2026)
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-08
ETFE (ethylene tetrafluoroethylene) occupies ein spezifisch niche in der fluoropolymer family: es ist tougher und mehr flexible als PTFE, mehr abrasion-resistant als FEP, und processable durch conventional extrusion — making es der dominant insulation...
ETFE (ethylene tetrafluoroethylene) occupies ein spezifisch niche in der fluoropolymer family: es ist tougher und mehr flexible als PTFE, mehr abrasion-resistant als FEP, und processable durch conventional extrusion — making es der dominant insulation material für aerospace draht und cable. ETFE's key advantage ist flex life: thin-wall ETFE insulation ein stranded copper draht survives 10-20× mehr flex cycles als PTFE insulation von der gleich thickness. Dies makes es der standard für: aircraft wiring harnesses (Boeing, Airbus), robotic arm cable carriers (repetitive flexing in automation), downhole öl & gas instrumentation draht (combined chemical + thermal + mechanical demands), und nuclear plant steuerung cabling (radiation widerstand).
ETFE ist auch notable für sein verwenden in architectural membranes — der Eden Project biomes und der Beijing National Aquatics Center ('Wasser Cube') verwenden ETFE foil cushions für lightweight, UV-transparent roofs. Dies application ist unrelated zu draht insulation but demonstrates ETFE's unique combination von mechanical toughness, chemical widerstand, und UV transparency unmatched durch any andere fluoropolymer.
Recommended Anwendungen
ETFE Hoch-Flex-Life Güte ist commonly specified für:
⚠ Nicht Recommended Für
ETFE Hoch-Flex-Life Güte ist nicht recommended für:
- Anwendungen requiring ultra-niedrig friction coefficient (ETFE friction ~0.4 vs PTFE ~0.05; verwenden PTFE für bearings)
- Continuous service über 150°C (verwenden PFA oder PEEK für higher temperature)
- Strong polar solvent exposure bei elevated temperature (verwenden PTFE oder PFA für aggressive chemical environments)
Selection & Application Leitfaden
ETFE (Tefzel) ist der hoch-strength fluoropolymer choice für draht und cable insulation, architectural membranes, und chemical lining applications wo PTFE's mechanical weakness ist ein problem. Choose ETFE über PTFE wenn tensile strength (45 MPa vs 25 MPa) und abrasion widerstand sind needed; über PFA wenn unter kosten und higher mechanical toughness matter und der 150°C service temperature ist sufficient. ETFE ist auch der meiste radiation-resistant fluoropolymer.
Real-World Anwendungen
ETFE's combination von electrical properties, flame widerstand (limiting oxygen index 31%), und mechanical toughness makes es standard für MIL-W-22759 aircraft wiring.
ETFE film ist used für iconic building facades (Beijing Wasser Cube, Eden Project) providing 95% licht transmission, self-cleaning, und 30+ year weathering widerstand.
ETFE film provides UV-resistant, hoch-transmission vorne sheets für flexible und building-integrated photovoltaic modules.
ETFE lining provides chemical widerstand similar zu PTFE mit better mechanical strength und weldability für tank und vessel lining in chemical processing.
Processing & Kosten Considerations
Manufacturing Tips
- ETFE processes bei 270-310°C melt temperature mit mold temperatures von 80-120°C — unter als PFA und achievable ein standard hoch-temperature injection molding machines.
- ETFE können sein extruded in film (ab zu 12μm thickness), draht coating, und tubing. Es hat ein relatively narrow processing window compared zu commodity plastics — precise temperature steuerung ist wichtig.
- ETFE ist der meiste radiation-resistant fluoropolymer, maintaining properties nach gamma und electron-beam sterilization. Dies makes es suitable für nuclear und space applications wo andere fluoropolymers degrade.
ETFE costs $30-60/kg — mehr als commodity plastics but less als PFA ($50-100/kg) und viel less als PEEK. Für draht insulation, ETFE provides der best balance von leistung und kosten among fluoropolymers. ETFE architectural film ist expensive per square meter but offers 30+ year service life mit minimal maintenance, reducing total lifecycle kosten compared zu glass oder metal facades.
Technical Eigenschaften
| Dichte | 1.70 g/cm³ |
|---|---|
| Zugfestigkeit | 45 MPa |
| Schmelzpunkt | 260 °C |
| Shrinkage Rate | 2.0-3.0% |
| Flexural Modulus | 1.4 GPa |
| Hdt | 105 °C bei 1.82 MPa |
Engineering Werkzeug: Shrinkage & Kosten Estimator
Calculate teil weight, mold cavity dimensions accounting für shrinkage, und material kosten — alle locally in ihr browser.
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Tefzel ETFE | |
| Neoflon ETFE |
Frequently Asked Questions
ETFE vs PTFE für draht insulation — welche ist better?
ETFE für applications requiring flex life (moving cables, vibration environments), abrasion widerstand, oder radiation widerstand. PTFE für applications requiring der absolute highest temperature rating (260°C vs ETFE's 150°C continuous) oder der lowest dielectric constant. ETFE ist auch significantly easier zu strip (mechanically entfernen insulation von draht ends) als PTFE — ein practical consideration in hoch-volume draht harness manufacturing.
Können ETFE sein crosslinked für higher temperature leistung?
Ja — crosslinked ETFE (XL-ETFE) raises der continuous service temperature von 150°C zu approximately 200°C. Der crosslinking ist achieved durch electron beam irradiation nach extrusion. XL-ETFE ist specified für aerospace applications wo der draht kann sehen brief temperature excursions über ETFE's normal rating. Der trade-aus ist das XL-ETFE cannot sein recycled oder thermoformed nach crosslinking.
Wie tut ETFE compare zu PTFE für draht insulation?
ETFE hat 2× higher tensile strength (45 MPa vs 25 MPa), better abrasion widerstand, und können sein extruded als draht insulation (PTFE requires paste extrusion und sintering). PTFE offers better chemical widerstand und higher temperature rating (260°C vs 150°C für ETFE). Für aerospace wiring unter 150°C, ETFE ist standard; für extreme temperature oder chemical environments, PTFE ist specified.
Können ETFE sein welded?
Ja. ETFE können sein heat-welded, extrusion-welded, und impulse-welded — ein significant advantage über PTFE welche cannot sein welded. Dies makes ETFE ideal für tank lining systems und architectural membrane seams wo weldable joints sind erforderlich.
Ist ETFE suitable für outdoor applications?
Ja. ETFE hat outstanding UV und weather widerstand mit minimal property degradation über 30+ years von outdoor exposure. Es tut nicht yellow oder become brittle wie viele transparent polymers. ETFE film maintains >90% licht transmission nach decades von outdoor service.
Was ist der difference zwischen ETFE und FEP?
ETFE hat higher mechanical strength (45 MPa vs 30 MPa tensile), better abrasion widerstand, und better radiation widerstand. FEP hat better chemical widerstand (fully fluorinated), unter coefficient von friction, und higher maximum service temperature (200°C vs 150°C). Choose ETFE für mechanical/wear applications; FEP für chemical/temperature applications.
Ist ETFE recyclable?
Ja. ETFE ist thermoplastic und können sein melted und reprocessed multiple times ohne significant property degradation. Dies ist ein environmental advantage über thermoset materials. ETFE architectural membranes können sein recycled bei end von life, contributing zu sustainable building certifications.
Verwandt Diagnostics & Materials
PEEK Polyetheretherketone: Hoch-Leistung Polymer...
Polyetheretherketone (PEEK) ist ein colorless organic thermoplastic polymer in der polyaryletherketone (PAEK) family,...
Ultem PEI (Polyetherimide): Hoch-Temperatur Amorphous...
Polyetherimide (PEI), best known durch Sabic's trade name Ultem, ist ein amorphous hoch-leistung thermoplastic...
PTFE Teflon: Ultimate Chemical Widerstand & Niedrig-Friction...
Polytetrafluoroethylene (PTFE), widely known durch der trade name Teflon, ist ein fluoropolymer mit der lowest...
PPS Ryton: Polyphenylene Sulfide Hoch-Temp...
Polyphenylene sulfide (PPS), best known durch Solvay's trade name Ryton, ist ein semicrystalline hoch-leistung...
LCP Vectra: Liquid Crystal Polymer für Micro-Molding &...
Liquid Crystal Polymer (LCP), best known durch Celanese's trade name Vectra, ist ein unique class von thermotropic...
Vespel Polyimide: Extreme-Temperatur Polymer für...
Polyimide (PI), commercially known als DuPont Vespel, ist der highest-temperature-rated polymer commercially...
PAI Torlon: Polyamide-Imide Extreme-Leistung Polymer...
Polyamide-imide (PAI), commercially known als Solvay Torlon, occupies der leistung space zwischen PEEK und...
PES Veradel: Polyethersulfone Transparent Hoch-Temp...
Polyethersulfone (PES), commercially known als Solvay Veradel oder BASF Ultrason E, ist ein amorphous hoch-temperature...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org