PTFE vs PFA: Complete Engineering Vergleich (2026) — Temperatur, Strength
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-02
Welche Material Sollte Sie Choose?Choose PTFE wenn:Application requirements align mit PTFE propertiesChoose PFA wenn:Application requirements align mit PFA propertiesPrice ComparisonPTFE: $25-60/kg vs PFA: $50-100/kg · Prices vary durch grade und...
Welche Material Sollte Sie Choose?
Choose PTFE wenn:
- Application requirements align mit PTFE properties
Choose PFA wenn:
- Application requirements align mit PFA properties
Preis Vergleich
PTFE: $25-60/kg vs PFA: $50-100/kg · Prices vary durch grade und quantity
Beide fully fluorinated mit near-universal chemical widerstand. PTFE cannot sein melt-processed (compression + sinter nur); PFA ist injection-moldable. PFA wins für complex geometries (semiconductor wafer handling). PTFE costs ~40% less. PTFE's melt viscosity ist 10^11 Pa·s — 1,000,000× higher als moldable thermoplastics.
Vergleich bei ein Glance
| Zugfestigkeit | PTFE: 25 vs PFA: 30 MPa |
|---|---|
| Schmelzpunkt | PTFE: 327 vs PFA: 305°C |
| Shrinkage Rate | PTFE: 3-5 vs PFA: 3-4% |
| Flexural Modulus | PTFE: 0.5 vs PFA: 0.6 GPa |
| Hdt | PTFE: 120 vs PFA: 75°C |
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Teflon PTFE vs Teflon PFA |
Frequently Asked Questions
Warum können't PTFE sein injection molded?
Molecular weight 10^6-10^7; viscosity >10^11 Pa·s bei 380°C. PFA adds perfluoropropyl vinyl ether comonomer zu reduce MW und enable melt processing while preserving chemical widerstand.
Verwandt Diagnostics & Materials
PEEK vs Ultem PEI: Welche Hoch-Leistung Polymer Sollte...
Welche Material Sollte Sie Choose?Choose PEEK (Polyetheretherketone) wenn:Extreme chemical + thermal environments (öl...
PPS Ryton vs LCP Vectra: Welche Ultra-Flow Hoch-Temp...
Welche Material Sollte Sie Choose?Choose PPS Ryton wenn:Chemical exposure + moderate flow length (automotive...
PTFE Teflon vs PEEK: Chemical Widerstand vs Mechanical...
Welche Material Sollte Sie Choose?Choose PTFE Teflon (Polytetrafluoroethylene) wenn:Seals, gaskets, liningswhere...
Vespel Polyimide vs PEEK: Wenn der Highest-Temperatur...
Welche Material Sollte Sie Choose?Choose Vespel PI (Polyimide) wenn:Aerospace motor, semiconductor plasma, ultra-hoch...
Torlon PAI vs Vespel PI: Ultimate Hoch-Temperatur...
Welche Material Sollte Sie Choose?Choose Torlon PAI (Polyamide-imide) wenn:unter kosten, easier processingChoose Vespel...
Glass Fiber vs Carbon Fiber Reinforced Thermoplastics:...
Welche Material Sollte Sie Choose?Choose Glass Fiber Reinforced (GFR) wenn:Unter kosten und easier processingChoose...
PEEK vs Torlon PAI: Complete Property, Kosten &...
Welche Material Sollte Sie Choose?Choose PEEK (Polyetheretherketone) wenn:PEEK offers melt-processability und unter...
Ultem PEI vs Polysulfone PSU: Hoch-Temperatur Amorphous...
Welche Material Sollte Sie Choose?Choose Ultem PEI (Polyetherimide) wenn:Ultem offers 60°C higher HDT und inherent...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org