PC vs PMMA: Complete Engineering Vergleich (2026) — Temperatur, Strength
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-02
Welche Material Sollte Sie Choose?Choose PC (Polycarbonate) wenn:Mäßig strength sufficient (65 MPa)Choose PMMA (Acrylic) wenn:Mäßig strength sufficient (70 MPa)Preis ComparisonPC (Polycarbonate): $5-12/kg vs PMMA (Acrylic): $3-8/kg · Prices vary...
Welche Material Sollte Sie Choose?
Choose PC (Polycarbonate) wenn:
- Mäßig strength sufficient (65 MPa)
Choose PMMA (Acrylic) wenn:
- Mäßig strength sufficient (70 MPa)
Preis Vergleich
PC (Polycarbonate): $5-12/kg vs PMMA (Acrylic): $3-8/kg · Prices vary durch grade und quantity
PC und PMMA sind der two dominant transparent engineering plastics, selected based ein ein trade-aus zwischen impact widerstand (PC) und surface hardness/optical clarity (PMMA). PMMA transmits 92% visible licht vs 88% für PC, und PMMA's surface hardness (Rockwell M95) ist significantly higher als PC (M70) — PMMA resists scratching in applications wie display windows und instrument panels. PC's defining advantage: impact strength >700 J/m vs PMMA's 15-20 J/m — PC ist essentially unbreakable in standard tests while PMMA ist brittle. Dies makes PC der nur choice für safety-kritisch transparent components (machine guards, face shields, aircraft windows).
Weathering: PMMA hat inherently superior UV widerstand — es tut nicht yellow oder embrittle nach decades von outdoor exposure. Norm PC yellows significantly innerhalb 2-3 years von outdoor UV exposure unless UV-stabilized grades sind specified. Für outdoor transparent applications (skylights, signage), PMMA ist preferred. Für applications requiring beide transparency und impact widerstand (automotive headlamp lenses), PC mit ein UV-curable hard coat (silicone-based) provides der best von beide materials — PC's impact strength plus der hard coat's UV protection und scratch widerstand.
Vergleich bei ein Glance
| Zugfestigkeit | PC: 65 MPa vs PMMA: 70 MPa |
|---|---|
| Schmelzpunkt | PC: Amorphous (Tg 147°C) vs PMMA: Amorphous (Tg 105°C) |
| Shrinkage Rate | PC: 0.6% vs PMMA: 0.4% |
| Flexural Modulus | PC: 2.3 GPa vs PMMA: 3.0 GPa |
| Hdt | PC: 135°C vs PMMA: 95°C (bei 1.82 MPa) |
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Makrolon vs Plexiglas | |
| Lexan vs Acrylite |
Frequently Asked Questions
Können PC und PMMA sein bonded together?
Ja, mit solvent bonding using methylene chloride oder specialized acrylic adhesives. However, der difference in thermal expansion (PC CTE 65 × 10⁻⁶/K vs PMMA 70 × 10⁻⁶/K) ist klein enough das thermal cycling tut nicht cause delamination in meiste applications. UV-curable optical adhesives bereitstellen der clearest bond line für optical applications.
Verwandt Diagnostics & Materials
PEEK vs Ultem PEI: Welche Hoch-Leistung Polymer Sollte...
Welche Material Sollte Sie Choose?Choose PEEK (Polyetheretherketone) wenn:Extreme chemical + thermal environments (öl...
PPS Ryton vs LCP Vectra: Welche Ultra-Flow Hoch-Temp...
Welche Material Sollte Sie Choose?Choose PPS Ryton wenn:Chemical exposure + moderate flow length (automotive...
PTFE Teflon vs PEEK: Chemical Widerstand vs Mechanical...
Welche Material Sollte Sie Choose?Choose PTFE Teflon (Polytetrafluoroethylene) wenn:Seals, gaskets, liningswhere...
Vespel Polyimide vs PEEK: Wenn der Highest-Temperatur...
Welche Material Sollte Sie Choose?Choose Vespel PI (Polyimide) wenn:Aerospace motor, semiconductor plasma, ultra-hoch...
Torlon PAI vs Vespel PI: Ultimate Hoch-Temperatur...
Welche Material Sollte Sie Choose?Choose Torlon PAI (Polyamide-imide) wenn:unter kosten, easier processingChoose Vespel...
Glass Fiber vs Carbon Fiber Reinforced Thermoplastics:...
Welche Material Sollte Sie Choose?Choose Glass Fiber Reinforced (GFR) wenn:Unter kosten und easier processingChoose...
PEEK vs Torlon PAI: Complete Property, Kosten &...
Welche Material Sollte Sie Choose?Choose PEEK (Polyetheretherketone) wenn:PEEK offers melt-processability und unter...
Ultem PEI vs Polysulfone PSU: Hoch-Temperatur Amorphous...
Welche Material Sollte Sie Choose?Choose Ultem PEI (Polyetherimide) wenn:Ultem offers 60°C higher HDT und inherent...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org