Torlon PAI vs Celazole PBI: Complete Engineering Vergleich (2026) — Temperatur, Strength
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-02
Welche Material Sollte Sie Choose?Choose Torlon PAI wenn:Tg 275°C, $80-120/kg, simpler post-cure (3-7 days)Choose Celazole PBI wenn:Operating temperatures über 260°C requiredMaximum tensile strength (160 MPa)Preis ComparisonTorlon PAI: $80-120/kg vs...
Welche Material Sollte Sie Choose?
Choose Torlon PAI wenn:
- Tg 275°C, $80-120/kg, simpler post-cure (3-7 days)
Choose Celazole PBI wenn:
- Operating temperatures über 260°C erforderlich
- Maximum tensile strength (160 MPa)
Preis Vergleich
Torlon PAI: $80-120/kg vs Celazole PBI: $1500-2000/kg · Prices vary durch grade und quantity
PAI und PBI: two highest-temperature melt-processable thermoplastics. PBI hat highest Tg von any commercial polymer (427°C). Requires 7+ day post-cure, costs ~$1,500-2,000/kg. PAI: Tg 275°C, $80-120/kg, simpler post-cure (3-7 days). Für meiste applications unter 260°C: PAI. PBI nur wo PAI cannot survive thermally.
Vergleich bei ein Glance
| Zugfestigkeit | PAI: 150 vs PBI: 160 MPa |
|---|---|
| Schmelzpunkt | PAI: Tg 275 vs PBI: Tg 427°C |
| Shrinkage Rate | PAI: 0.6 vs PBI: 2-3% |
| Flexural Modulus | PAI: 5.0 vs PBI: 6.5 GPa |
| Hdt | PAI: 280 vs PBI: 435°C |
Equivalents & Cross-References
| Entsprechung / Alternate | Action |
|---|---|
| Torlon 4203 vs Celazole PBI |
Frequently Asked Questions
Warum PBI costs 10-15× mehr?
Monomer (tetraaminobiphenyl) requires multi-schritt inert-atmosphere synthesis. Polymerization in polyphosphoric acid bei 200°C. Post-cure: 7-14 days. PAI uses simpler chemistry mit 3-7 day post-cure.
Verwandt Diagnostics & Materials
PEEK vs Ultem PEI: Welche Hoch-Leistung Polymer Sollte...
Welche Material Sollte Sie Choose?Choose PEEK (Polyetheretherketone) wenn:Extreme chemical + thermal environments (öl...
PPS Ryton vs LCP Vectra: Welche Ultra-Flow Hoch-Temp...
Welche Material Sollte Sie Choose?Choose PPS Ryton wenn:Chemical exposure + moderate flow length (automotive...
PTFE Teflon vs PEEK: Chemical Widerstand vs Mechanical...
Welche Material Sollte Sie Choose?Choose PTFE Teflon (Polytetrafluoroethylene) wenn:Seals, gaskets, liningswhere...
Vespel Polyimide vs PEEK: Wenn der Highest-Temperatur...
Welche Material Sollte Sie Choose?Choose Vespel PI (Polyimide) wenn:Aerospace motor, semiconductor plasma, ultra-hoch...
Torlon PAI vs Vespel PI: Ultimate Hoch-Temperatur...
Welche Material Sollte Sie Choose?Choose Torlon PAI (Polyamide-imide) wenn:unter kosten, easier processingChoose Vespel...
Glass Fiber vs Carbon Fiber Reinforced Thermoplastics:...
Welche Material Sollte Sie Choose?Choose Glass Fiber Reinforced (GFR) wenn:Unter kosten und easier processingChoose...
PEEK vs Torlon PAI: Complete Property, Kosten &...
Welche Material Sollte Sie Choose?Choose PEEK (Polyetheretherketone) wenn:PEEK offers melt-processability und unter...
Ultem PEI vs Polysulfone PSU: Hoch-Temperatur Amorphous...
Welche Material Sollte Sie Choose?Choose Ultem PEI (Polyetherimide) wenn:Ultem offers 60°C higher HDT und inherent...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org