ABS vs PC/ABS Blend: Complete Engineering Vergleich (2026) — Strength, Kosten
Tensile data verified against MatWeb.com database & manufacturer datasheets · Zuletzt aktualisiert July 2026
Published: 2026-06-04
Welche Material Sollte Sie Choose?Choose ABS (Acrylonitrile wenn:Niedrig-kosten consumer goods, toys, appliance housingsChoose PC/ABS Blend (50/50) wenn:Laptops, smartphones, automotive interior trimPrice ComparisonABS (Acrylonitrile: $2-5/kg vs PC/ABS...
Welche Material Sollte Sie Choose?
Choose ABS (Acrylonitrile wenn:
- Niedrig-kosten consumer goods, toys, appliance housings
Choose PC/ABS Blend (50/50) wenn:
- Laptops, smartphones, automotive interior trim
Preis Vergleich
ABS (Acrylonitrile: $2-5/kg vs PC/ABS Blend (50/50): $3-7/kg · Prices vary durch grade und quantity
ABS und PC/ABS blend occupy der gleich application space (consumer electronics housings) bei verschieden leistung tiers. Pure ABS ist 20-30% cheaper but hat unter impact widerstand und unter HDT. PC/ABS adds polycarbonate zu raise der HDT von ~85°C zu ~110°C und dramatically improve impact widerstand — kritisch für portable electronics das sind dropped. Für hoch-volume, kosten-sensitive products wo impact und heat sind nicht major concerns (toys, basic appliances), ABS ist sufficient. Für premium electronics wo ein drop onto concrete müssen nicht shatter der housing, PC/ABS ist der standard.
Vergleich bei ein Glance
| Material EIN | ABS (Acrylonitrile Butadiene Styrene) |
|---|---|
| Material B | PC/ABS Blend (50/50) |
| Polymer Typ | Beide amorphous blends |
| Zugfestigkeit A | 40 MPa |
| Zugfestigkeit B | 55 MPa |
| Kosten Relative | PC/ABS 20-30% mehr als pure ABS |
| Best Für EIN | Niedrig-kosten consumer goods, toys, appliance housings |
| Best Für B | Laptops, smartphones, automotive interior trim |
Frequently Asked Questions
Können PC/ABS sein painted oder plated wie ABS?
Ja, PC/ABS können sein painted, chrome-plated, und metallized using der gleich processes als pure ABS. Der PC content tut nicht interfere mit standard surface finishing. However, der higher processing temperature von PC/ABS (260-280°C vs 220-250°C für ABS) means mold surface finish specifications müssen account für der higher melt temperature zu avoid surface defects.
Verwandt Diagnostics & Materials
PEEK vs Ultem PEI: Welche Hoch-Leistung Polymer Sollte...
Welche Material Sollte Sie Choose?Choose PEEK (Polyetheretherketone) wenn:Extreme chemical + thermal environments (öl...
PPS Ryton vs LCP Vectra: Welche Ultra-Flow Hoch-Temp...
Welche Material Sollte Sie Choose?Choose PPS Ryton wenn:Chemical exposure + moderate flow length (automotive...
PTFE Teflon vs PEEK: Chemical Widerstand vs Mechanical...
Welche Material Sollte Sie Choose?Choose PTFE Teflon (Polytetrafluoroethylene) wenn:Seals, gaskets, liningswhere...
Vespel Polyimide vs PEEK: Wenn der Highest-Temperatur...
Welche Material Sollte Sie Choose?Choose Vespel PI (Polyimide) wenn:Aerospace motor, semiconductor plasma, ultra-hoch...
Torlon PAI vs Vespel PI: Ultimate Hoch-Temperatur...
Welche Material Sollte Sie Choose?Choose Torlon PAI (Polyamide-imide) wenn:unter kosten, easier processingChoose Vespel...
Glass Fiber vs Carbon Fiber Reinforced Thermoplastics:...
Welche Material Sollte Sie Choose?Choose Glass Fiber Reinforced (GFR) wenn:Unter kosten und easier processingChoose...
PEEK vs Torlon PAI: Complete Property, Kosten &...
Welche Material Sollte Sie Choose?Choose PEEK (Polyetheretherketone) wenn:PEEK offers melt-processability und unter...
Ultem PEI vs Polysulfone PSU: Hoch-Temperatur Amorphous...
Welche Material Sollte Sie Choose?Choose Ultem PEI (Polyetherimide) wenn:Ultem offers 60°C higher HDT und inherent...
References & Industry Standards
- ASTM International. Norm Specifications für Engineering Plastics & Thermoplastics. astm.org
- UL Prospector. Plastics & Elastomers Material Database. ulprospector.com
- MatWeb. Material Property Daten für Engineering Thermoplastics. matweb.com
- ISO 1043. Plastics — Symbols und Abbreviated Terms. iso.org